Vendor: Team Associated
Type: 1/10 2wd Buggy
Price: 389.99

The RC10B7 embodies a new era in off-road racing excellence, delivering a paradigm shift in performance with its cutting-edge features. With innovative long-arm suspension geometry, a precisely weighted electronics layout, and customizable KPI steering blocks, this buggy brings a new level of tunability to the 2wd buggy class. These improvements result in heightened grip, superior cornering speeds, and a more user-friendly driving experience, giving you the ultimate track weapon!

Created for competition, the RC10B7 stands as the optimal entry point for racers targeting carpet, AstroTurf, and select high-grip sealed clay tracks. Complete with a redesigned gear differential, front and rear anti-roll bars, and an optimized high-grip setup using stiffer springs and enhanced shock pistons, the B7 is capable of adapting to a wide range of track conditions. With interchangeable parts between the RC10B7 and RC10B7D this empowers drivers to tailor their setups based on varied track conditions while keeping the world renowned durability, speed, and championship legacy designed into every Team Associated chassis.

NOTE: RC Kits are an unassembled Remote Control Model that require assembly, racer selected electronics, and other racer provided items. Photos of assembled kit are for illustrative purposes only. For a complete list of needed items to drive this kit please see the list above.

Product Details:

Needed to Complete

• (1) 540-Size Motor
• (1) Electronic Speed Control
• (1) 7.4V - 7.6V Shorty Battery
• (1) Battery Charger
• (1) 2+ Channel Radio System
• (1) 1/10 Buggy Body
• (1) Standard-Size Servo
• (4) 1/10 Off-Road Tires and Wheels

Introduction

Starting with the original RC10, Team Associated has been at the leading edge of 1:10 scale 2WD off road for the last 40 years and are proud to introduce this next generation RC10 to the world—the RC10B7. 40 years has seen a lot of development and changes, with each generation being a step forward from the last. The RC10B7 is no exception, boasting new long-arm suspension geometry, weight-centralized electronics layout, KPI adjustable steering blocks, and increased tunability throughout the whole chassis. These innovations have increased the potential for grip and corner speed, which leads to faster lap times and an overall easier-to-drive feel than the previous generation.

Features

• 5-gear laydown transmission with low profile motor mount moves weight of motor closer to the center of the car
• Long-arm suspension geometry improves grip and predictability in all conditions
• KPI adjustable steering and caster blocks allows for fine tuning steering feel. Three options are included in kit
• Vertical front outer ballstud allows fine tuning of roll center, camber gain, and link length
• Height adjustable aluminum front bulkhead allows for further tuning of front roll center
• Standard and HRC (High Roll Center) rear hubs included
• Easy access anti-roll bars front and rear
• High volume gear differential improves consistency of differential action over a longer runs. Fits LTC internal diff gears from the RC10B74.2
• Highly adjustable battery holder with thumb tabs allows for easy battery removal and fine tuning of weight bias

• 7075-T6 aluminum chassis with increased departure angle and optional weight plate pockets
• 6.5mm aluminum front axle increases stability and grip when using slim front wheels and low-profile tires
• HD 69mm CVA bones and differential outdrives for improved durability
• Lightweight molded servo mount
• One-piece rear wing mount improves durability
• New 7-inch rear wing and 2.5-inch front wing
• Low-profile body
• Shock tower covers front and rear
• 3.5mm turnbuckles and ballcups

Overview

The RC10B7 is the recommended starting kit for those who plan to race on carpet, AstroTurf®, and some high-grip sealed clay tracks. This kit comes equipped with an all-new gear differential, front and rear anti-roll bars, and an optimized high-grip setup which includes stiffer springs and higher pack shock pistons. As with previous generations, the RC10B7 and RC10B7D feature fully interchangeable parts between the two kits, which allows the user to pick and choose what configuration they want to use depending on track conditions. Both versions come with the same durability, speed, and lineage of a champion that is found in any Team Associated race platform.

RC10B7 Video Series: RC10 History

 

 

Differentials

High-volume gear differential improves consistency of action over a longer run.

 

 

Roll Bars

Easy access anti-roll bars on the front and rear.

 

 

Transmission

5-gear laydown transmission with lower profile motor mount moves weight of the motor closer to the center of the car.

 

 

Rear Hubs

Standard and HRC (High Roll Center) rear hubs included.

 

 

Battery Holder

Highly adjustable battery holder allows for easy battery removal and fine tuning of weight bias.

 

 

Servo Mount

Lightweight molded servo mount.

 

 

Ballstud

Vertical front outer ballstud allows fine tuning of roll center, camer gain, and link length.

 

 

Steering

KPI adjustable steering and caster blocks allow for tuning steering feel. Three options are included in the kit.

 

 

Suspension

Long-arm suspension geometry improves drip and predictability in all conditions.

 

 

Bulkhead

Height adjustable aluminum front bulkhead allows for further tuning of front roll center.

 

Product Specifications

Product Weight	Varies
Vehicle Type	Buggy
Charger	Sold Separately
Differential	Gear Differentials
Receiver	Sold Separately
Shock Type	Oil-Filled Shocks
Speed Control	Sold Separately
Ball Bearings	Full Ball Bearings
Completion Level	Kit
Drivetrain	2WD
Power Type	Electric
Servos	Sold Separately
Vehicle Size	Standard
Product Width	Varies
Radio	Sold Separately
Battery	Sold Separately
Internal Gear Ratio	2.60:1
Product Length	15.35" (390 mm)
Body	Sold Separately
Scale	1/10

Vendor: Team Associated
Type: 1/10 2wd Buggy
Price: 389.99

The RC10B7D embodies a new era in off-road racing excellence, delivering a paradigm shift in performance with its cutting-edge features. With innovative long-arm suspension geometry, a precisely weighted electronics layout, and customizable KPI steering blocks, this buggy brings a new level of tunability to the 2wd buggy class. These improvements result in heightened grip, superior cornering speeds, and a more user-friendly driving experience, giving you the ultimate track weapon!

Created for competition, the RC10B7D stands as the optimal entry point for racers targeting dirt, clay, and some low-grip turf tracks. Complete with a redesigned ball differential, and an optimized low-grip setup using softer springs and enhanced shock pistons, the B7D is capable of adapting to a wide range of track conditions. With interchangeable parts between the RC10B7 and RC10B7D this empowers drivers to tailor their setups based on varied track conditions while keeping the world renowned durability, speed, and championship legacy designed into every Team Associated chassis.

Needed to Complete

• (1) 540-Size Motor
• (1) Electronic Speed Control
• (1) Battery Charger
• (1) 7.4V - 7.6V Shorty Battery
• (1) 2+ Channel Radio System
• (1) Standard-Size Steering Servo
• (1) 1/10 Buggy Body
• (4) 1/10 Off-Road Tires and Wheels

Features

• 5-gear laydown transmission with low profile motor mount moves weight of motor closer to the center of the car
• Long-arm suspension geometry improves grip and predictability in all conditions
• KPI adjustable steering and caster blocks allows for fine tuning steering feel. Three options are included in the kit.
• Vertical front outer ballstud allows fine tuning of roll center, camber gain, and link length
• Height adjustable aluminum front bulkhead allows for further tuning of front roll center
• Standard and HRC (High Roll Center) rear hubs included
• Highly adjustable battery holder with thumb tabs allows for easy battery removal and fine tuning of weight bias
• 7075-T6 aluminum chassis with increased departure angle and optional weight plate pockets

• HD 69mm CVA bones and differential outdrives for improved durability
• Lightweight molded servo mount
• One-piece rear wing mount improves durability
• New 7-inch rear wing and 2.5-inch front wing
• Low-profile body included
• Shock tower covers front and rear
• 3.5mm turnbuckles and ballcups

Overview

The RC10B7D is the recommended starting kit for those who plan to race on dirt, clay, and some low-grip AstroTurf® tracks. This kit comes equipped with a ball differential and an optimized setup which includes softer springs and lower pack pistons. As with previous generations, the RC10B7D and RC10B7 feature fully interchangeable parts between the two kits, which allows the user to pick and choose what configuration they want to use depending on track conditions. Both versions come with the same durability, speed, and lineage of a champion that is found in any Team Associated race platform.

RC10B7 Video Series: RC10 History

 

 

Transmission

5-gear laydown transmission with lower profile motor mount moves weight of motor closer to center of the car.

 

 

Rear Wing

One-piece rear wing mount improves durabillity.

 

 

Differentials

HD 69mm CVA bones and differential outdrives for improved durability.

 

 

Rear Hubs

Standard and HRC (High Roll Center) rear hubs included.

 

 

Servo Mount

Lightweight molded servo mount.

 

 

Battery Holder

Highly adjustable battery holder with thumb tabs allows for easy battery removal and fine tuning of weight bias.

 

 

Steering

KPI adjustable steering and caster blocks allow for the tuning steering feel, Three options are included in the kit.

 

 

Ballstuds

Vertical front outer ballstud allows fine tuning of roll center, camber gain, ans link.

 

 

Suspension

Long-arm suspension geometry improves grip and predictability in all conditions.

 

 

Bulkhead

Height adjustable aluminum front bulkhead allows for further tuning of front roll center.

 

Product Specifications

Chassis	Aluminum Plate
Completion Level	Kit
Drivetrain	2WD
Power Type	Electric
Servos	Sold Separately
Body	Sold Separately
Scale	1/10
Product Weight	Varies
Vehicle Type	Buggy
Battery	Sold Separately
Internal Gear Ratio	2.60:1
Product Length	15.35" (390 mm)
Charger	Sold Separately
Receiver	Sold Separately
Shock Type	Oil-Filled Shocks
Product Width	Varies
Radio	Sold Separately
Speed Control	Sold Separately

Vendor: WIRC
Type: 1/8 Scale Truggy
Price: 799.99

Vendor: Team Associated
Type: 1/8 Scale Buggy
Price: 669.99

Vendor: Tekno
Type: 1/10 Short Course
Price: 469.99

High-Performance 1/10 Electric 4WD RC Truck Kit

The Tekno RC SCT410 2.0 has been designed to give you the technology and performance to drive right to the podium. Entry-Level Enthusiasts will enjoy the quick and simple build while Seasoned Pros will love the extremely tunable chassis layout. Capable of handling 2-4S and 1/10-1/8 power systems, Tekno has given you a highly versatile chassis to build from. Whether you are just starting out in Short Course Truck (SCT) Racing or are at pro level, the SCT410 2.0 has what you need to be successful.

 

The BEST 4X4 Short Course Truck of 2023 (Tekno SCT410 2.0)

 

About The SCT410 2.0

Long Wear Chassis

The 4mm long wear chassis accommodates plenty of performance features like the Hybrid Hinge Pin Blocks with Integrated Steel Braces that provide exceptional stability and durability, ensuring precise handling on demanding tracks. The CNC 7075 One-Piece Motor Mount, with preset gearing options, gives you the flexibility to fine-tune your motor's powerband to match your driving style and track layout. With the versatility to run the standard 2S LiPo or more ballistic 3-4S battery packs, this RC vehicle is ready for maximum power.

Lightweight Differentials

Engineered to withstand the formidable power of 1/8 scale systems while upholding Tekno's renowned 'Tank' reputation, these durable, lightweight differentials are a game-changer. With these differentials, you'll experience a smoother, more efficient drivetrain and quicker acceleration while reducing the load on your electronics. Whether you're navigating high-grip surfaces or challenging loose terrain, the versatility of lightweight fluid-filled differentials guarantees peak performance for your SCT for each and every race day.

Beefy Shock Towers

The robust 4mm 7075 Shock Towers feature integrated chassis braces to reinforce your SCT's structural integrity, ensuring exceptional durability and stability during demanding off-road sessions. Paired with these towers are the super smooth 13mm Big Bore Shocks, offering a plush and responsive suspension system that absorbs ruts with ease. These shocks are compatible with an array of 16mm spring options, allowing for precise tuning to match your driving style and track conditions. With this winning combination, you'll achieve superior control and performance, whether you're tackling rough terrains or fine-tuning your setup for competitive racing.

Chassis Layout

The SCT410 2.0 prioritizes durability and drivetrain strength, offering built-in compatibility with 2 to 4S power setups right from the start. Featuring robust hardened steel universal driveshafts, outdrives, and stub axles, this RC vehicle is engineered to withstand the harshest conditions. Its modular design ensures versatility by allowing seamless integration with a vast array of parts and options derived from the EB/NB/ET/NT48 2.X line of vehicles. This adaptability empowers enthusiasts and racers to tailor the vehicle to their individual driving preferences and style.

Features:

• Long Wear 4mm Black Anodized Chassis
• Lightweight differentials
• Hybrid hinge pin blocks with integrated steel braces
• CNC 7075 aluminum one-piece motor mount with preset gearing options
• 13mm big bore shocks with 16mm spring options
• Beefy 4mm 7075 aluminum shock towers with integrated braces
• Accommodates standard 2S to 4S battery packs
• Hardened steel drivetrain is 1/8th power system ready
• HD bumpers nerf bars and body mounts
• Compatible with many EB/NB48 2.1 parts and options

Vendor: WIRC
Type: 1/8 Scale Buggy
Price: 739.99

Vendor: WIRC
Type: 1/8 Scale Buggy
Price: 709.99

Vendor: Arrma
Type: 1/8 Scale Buggy
Price: 629.99

Loaded with upgrades to improve durability and handling, the TLR Tuned TYPHON 1/8 4WD Race Buggy adds chassis tuning and racing capabilities to the top-of-the-line ARRMA bash platform — as well as RTR convenience and proven Spektrum electronics.

• The ultimate 1/8 scale ARRMA buggy out of the box, with many laser-etched TLR Tuned parts.
• Ready for racing or bashing with factory-installed Spektrum electronics.
• Standout ARRMA body with an exclusive paint scheme of Race Spec colors.
• Powerful 4S and 6S LiPo capable Spektrum brushless power system.
• Spektrum SLT3 3-channel 2.4GHz radio and SR315 dual protocol receiver.

In The Box

• (1) 1/8 TLR Tuned TYPHON 6S 4WD BLX Buggy RTR
• (1) Spektrum Firma 150A Smart Waterproof ESC
• (1) Spektrum Firma 4074 2050Kv Brushless Motor
• (1) Spektrum 2.4GHz SLT3 3-Channel Transmitter
• (1) Spektrum SR315 3-Channel Dual Protocol Receiver
• (1) Spektrum SPMS652 Waterproof Metal-Geared Digital Servo
• (4) AA Batteries for the Transmitter
• (1) Product Manual

Needed to Complete

• (1) 4S or 6S LiPo Battery with EC5 or IC5 Connector
• (1) LiPo Battery Charger

Features

• The ultimate 1/8 scale ARRMA buggy out of the box, with many laser-etched TLR Tuned parts.
• Ready for racing or bashing with factory-installed Spektrum electronics.
• Standout ARRMA body with an exclusive paint scheme of Race Spec colors.
• Powerful 4S and 6S LiPo capable Spektrum brushless power system.
• Spektrum SLT3 3-channel 2.4GHz radio and SR315 dual protocol receiver.
• Spektrum S652 steel gear waterproof digital servo with 265 oz-in of torque @ 7.4V.

• TLR Tuned 7075-T6 aluminum parts — chassis, shock towers, and steering rack.
• TLR Tuned adjustable suspension hangers.
• TLR Tuned black TLR branded shocks with machined tapered shock pistons, machined shock guides and X-ring Seals, attached to the shock towers with EXB shock standoffs.
• Black-anodized aluminum motor mount, servo mount, and 17mm wheel hexes.
• Race Spec tunable rear wing mounted on a high rear wing mount.
• Race compound dBoots EXABYTE tires.

Fully assembled and factory-equipped for bashing or racing!

Loaded with high-end parts for improved strength, handling, and long-term durability, the 1/8 scale ARRMA TLR Tuned TYPHON 4WD Race Buggy gives bashers the perfect platform for entering competitive racing. It has the chassis tuning capabilities of a race spec buggy and arrives ready-to-run, with proven Spektrum radio and brushless power systems installed. The TLR Tuned TYPHON 4WD Race Buggy RTR comes prepared to hit the racetrack or the bash spot — you decide which! With its powerful 4S and 6S LiPo capable Spektrum brushless power system, the TLR Tuned TYPHON blasts over rough terrain with ease. On 4S, you can compete at your local racetrack. With the additional power of a 6S LiPo, the TLR Tuned TYPHON performs stunts and tackles big jumps at your favorite off-road bash location. The buggy's durable TLR Tuned 7075-T6 aluminum upgrades include the chassis plate, steering rack, adjustable upper and lower suspension hangers, shock bodies, and front and rear shock towers. All are laser-etched with the TLR Tuned logo. The oil-filled, adjustable shocks have machined tapered pistons, machined shock guides, and X-ring seals, and are attached to the shock towers with Extreme Bash (EXB) stand-offs. The TLR Tuned TYPHON 4WD Race Buggy also features a heavy-duty drivetrain that holds up to extreme bashing and high-speed racing, with all-metal diff outdrives and gearbox internals plus durable steel driveshafts throughout. Its extra-strong wheel hubs support low-drag wheels on which ARRMA engineers have mounted multi-terrain, race compound dBoots EXABYTE tires for next-level grip. A Race Spec tunable rear wing helps to keep the tires and buggy grounded, contributing to confident control and responsive handling at high speeds. Maintenance downtime is kept to the minimum with an efficient, driver-friendly design. For example, an aluminum sliding mount gives you fast, hassle-free access to the factory-installed Spektrum Firma 4074 2050Kv brushless motor. Topping off the 1/8 scale TLR Tuned TYPHON 4WD Race Buggy RTR is a standout body finished in an exclusive paint scheme of Race Spec colors plus decals. It's the ultimate ARRMA buggy for intermediate-level bashers with an eye towards racing.

Video Overview

 

Under The Hood

 

  

 

SPEKTRUM 6S CAPABLE BRUSHLESS POWER SYSTEM

The included Spektrum Firma 2050Kv brushless motor and Firma 150A Smart ESC together provide the perfect power system for use with 4S or 6S LiPo batteries. On 4S you can compete at your local racetrack. The additional power supplied by a 6S LiPo supports big jumps and stunts at your local bash spot.

 

 

ALUMINUM PARTS

The Firma 2050Kv brushless motor arrives factory-installed on a black-anodized aluminum sliding motor mount for durability and fast, hassle-free access. The servo mount and 17mm wheel hexes are also constructed of aluminum for bash-ready strength.

 

 

SPEKTRUM SLT3 2.4GHz 3-CHANNEL RADIO

The included Spektrum SLT3 transmitter is ergonomically designed for fatigue-free driving and has a foam wheel for precise fingertip control. Throttle limits can be set at 50% or 75% until you're ready to use the full speed potential. Compatible with SLT and DSMR protocols, the SR315 3-channel receiver offers outstanding range and fast response rate. For dependable steering control, ARRMA includes a Spektrum S652 metal-gear digital servo capable of 265 oz-in of torque.

 

 

TLR TUNED 7075-T6 ALUMINUM PARTS

The TLR Tuned TYPHON 4WD Race Buggy RTR features many high-end aluminum parts that increase durability and improve handling. For intermediate-level bashers, it's the perfect platform to use for racing and to gain experience with tuning — Designed Faster and Tougher!

 

 

TLR TUNED ADJUSTABLE SUSPENSION HANGERS

Laser-etched with the TLR Tuned logo, the TLR Tuned aluminum lower and upper suspension hangers have many different inserts included in the box that you can swap out to tune your buggy for the best performance in a variety of driving conditions.

 

 

OIL-FILLED SHOCKS

The adjustable oil-filled shocks are mounted on TLR Tuned 7075-T6 Aluminum Shock Towers and feature TLR Tuned Aluminum Shock bodies, machined tapered shock pistons, and EXB Extreme Bash shock stand-offs. They easily soak-up bumps over dirt, asphalt, and grass for super-smooth damping.

 

 

RACE SPEC FINISHED BODY

Topping off the TLR Tuned TYPHON 4WD Race Buggy RTR is a sleek body that's factory-finished with exclusive Race Spec colors and decals, distinguishing it from the roller version TLR Tuned TYPHON. A low-drag, tunable rear wing helps keep the buggy grounded, contributing to confident control and responsive handling at thrilling high speeds.

 

 

HIGH-TRACTION dBOOTS EXABYTE TIRES

The dBoots EXABYTE tires are made of high-quality, race compound rubber for long-lasting durability. Their multi-surface tread pattern provides excellent traction in all conditions. The tires include foam inserts and are pre-glued to low-drag, 1/8 buggy nylon wheels. The industry standard 17mm hex fitting adds strength for extreme action and allows easy maintenance plus a wide range of tuning options.

 

  

Product Specifications

Product Weight	8.0lb (3.63kg)
Vehicle Type	Buggy
Water-Resistant	Yes
Body	Painted, decalled and trimmed
Brakes	Integral with ESC
Pinion	16T
Scale	1/8
Power Type	Electric
Gear Pitch	1.0 Mod
Servos	Included
Inner Tire / Outer Wheel Diameter	3.27 in
Power System	6S
Radio	Included
Technology	Dual Protocol RX (DSMR/SLT), Smart
Front Track	12.28 in (312mm)
Speed Control	Included
Product Width	12.28" (312 mm)
Final Drive Ratio	10.31
Motor Type	Brushless
Rear Track	12.28 in (312mm)
Wheelbase	12.91" (328 mm)
Charger	Sold Separately
Differential	3 Gear Diffs
Receiver	Included
Shock Type	Aluminum, Oil-Filled, Coil-Over Springs
Product Length	20.27" (515 mm)
Battery	Sold Separately
Connector Type	IC5
Motor Size	4074-2050Kv
Spur Gear	50T
Suspension	Independent
Tire Type	dBoots EXABYTE
Wheel Width	1.63 in (41.5mm)
Ball Bearings	Rubber shielded bearings throughout
Chassis	3mm Plate, 7075-T6 Aluminum
Completion Level	Ready-To-Run
Drivetrain	4WD
Drive Type	Forward/Brake/Reverse
Product Height	7.44" (189 mm)
Sensored	No
Wheel Hex Size	17mm

Vendor: Losi
Type: 1/16 Scale
Price: 169.99

Retro style and RTR ease make the 1/16 scale Mini JRXT 2WD equally essential for Losi fans and anyone who enjoys mini RC fun. Scaled down from the first-ever Losi truck, it's available in a Limited Edition of only 5000 vehicles — so get yours now!

• Limited Edition of only 5000 total produced, each serialized and highly collectable.
• Nothing else required — comes ready-to-run with LiPo battery and charger included.
• Ideal mini monster truck for loyal Losi fans and anyone who wants to try a mini RC.
• Retro styling mimics the 1990 JRXT and reproduces the trim scheme shown on its original box art.
• 5-link suspension provides extra grip for rougher, loamy terrain.

In The Box

• (1) Losi Mini JRXT 1/16 Scale 2WD RTR Monster Truck
• (1) Spektrum SLT2 2-Channel 2.4GHz Radio System
• (1) 7.4V 650mAh 2S 20C LiPo Hard Case Battery with EC2 Connector
• (1) USB LiPo Charger
• (4) AA Transmitter Batteries
• (1) Product Instruction Manual 

Needed to Complete

• Nothing! Everything you need to begin having fun with the 1/16 Mini JRXT Brushed 2WD is included!

Features

• Limited Edition of only 5000 total produced, each serialized and highly collectable.
• Nothing else required — comes ready-to-run with LiPo battery and charger included.
• Ideal mini monster truck for loyal Losi fans and anyone who wants to try a mini RC.
• Retro styling mimics the 1990 JRXT and reproduces the trim scheme shown on its original box art.
• 5-link suspension provides extra grip for rougher, loamy terrain.
• New motor plate for rear-mounted Jr's Choice 42-turn motor allows for higher gearing.

• 650mAh LiPo battery provides 10+ minutes of run time.
• 0.5A USB charger plugs into any USB port for easy battery charging.
• Spektrum SLT2 2.4GHz transmitter has a foam wheel grip for precise fingertip control.
• Includes a 25A 2-in-1 ESC and receiver unit.
• Ribbed front and spiked rear tires reproduce the style of the original 1990 JRXT.
• Flat fiberglass chassis provides flex for ease of driving.
• Full ball bearings increase efficiency and performance.
• Aluminum shocks are included for a smooth suspension.

The Original Racing Monster Truck

In late 1988 Losi became a worldwide force in RC racing after introducing the JRX2 1/10 scale buggy. Just two years later, a second Losi kit would make an even bigger statement and lead an even bigger surge in the popularity of RC vehicles. That kit was the 1/10 scale JRXT monster truck.

The buggy racing class became increasingly competitive in the late 1980s. Many racers wanted an easy-to-drive alternative that recaptured the fun that brought them to the hobby in the first place. They began converting their beloved JRX2 buggies into trucks using wheels, tires, and bodies from "toy" RC cars or from aftermarket conversion kits. Before long, the new truck class rivaled the popularity of the buggies!

Then, in 1990, Losi introduced its first-ever complete RC monster truck kit, the JRXT. And for everyone of that era eager to get started in the RC car and truck hobby, the JRXT immediately became the vehicle of choice.

More than any other model of its time, the 1/10 scale Losi JRXT monster truck caused a rush of new interest in RC. If your memory replays fun days from years ago spent racing RC vehicles with friends and family, chances are good that the JRXT has a starring role. Even better, you can relive those memories for real today with the new, 1/16 scale Mini JRXT.

The Losi Mini JRXT pays homage to its roots with retro styling that mimics the 1990 JRXT. It also reproduces the vintage trim scheme that was pictured on the original box art. Beyond the nostalgia, there are updates to the engineering for state-of-the-art Losi mini performance — making this the perfect mini monster truck for loyal Losi fans and for anyone who wants to try a mini RC.

It comes fully assembled and finished in a 100% ready-to-run package complete with a Spektrum 2-channel radio, LiPo battery, USB charger, and even AA transmitter batteries. With one easy purchase, you have everything you need to race and to celebrate the brand that helped build the RC racing hobby that you love today.

But only 5000 of you will be able to say you own a Mini JRXT. That's because this is a limited edition vehicle and only 5000 have been produced. Adding to the collectability, each is serialized with its unique production number. Don't miss out on your opportunity to own a one-of-a-kind mini version of one of the most popular vehicles in Losi history!

Video Overview

 

 

SCALED DOWN JRXT

The 1/16 scale Mini JRXT mimics the original 1/10 scale JRXT with new parts that include wide offset wheels, a truck body, updated front suspension parts, and a longer chassis.

 

 

SERIALLY NUMBERED

The Mini JRXT IS a limited edition release of only 5000 vehicles. Each is serialized with its unique production number as shown. You can own a highly collectable, one-of-a-kind mini version of one of the most popular vehicles in Losi history!

 

 

RACE INSPIRED MOTOR

A race-ready Jr's Choice 42-turn motor comes rear-mounted on the Mini JRXT chassis.

 

 

REAR MOTOR CONFIGURATION

Just as in the original JRXT, the Mini JRXT motor is mounted at the rear of the chassis. A new motor plate is included that allows for higher gearing.

 

 

5-LINK SUSPENSION

The added flex provided by its 5-link suspension helps the Mini JRXT perform better than other mini vehicles on rougher, loamy terrain.

 

 

COMPLETELY READY-TO-RUN

The ready-to-run Mini JRXT arrives fully assembled and complete with LiPo battery and charger. With one easy purchase, you have everything you need to race.

 

 

650mAh LIPO BATTERY AND 0.5A USB CHARGER

The Mini JRXT monster truck's 650mAh LiPo battery provides 10+ minutes of run time on a full charge. The included 0.5A USB charger plugs into any USB port for easy recharging.

 

 

SPEKTRUM SLT2 2.4GHz TRANSMITTER

The included Spektrum SLT2 transmitter is perfectly balanced for fatigue-free use and has a foam wheel grip for precise fingertip control.

 

 

2-IN-1 ESC/RECEIVER

The 25A 2-in-1 ESC and receiver unit provides a reliable signal and power delivery.

 

 

RIB FRONT AND SPIKED REAR TIRES

Ribbed tires in the front and spiked tires in the rear reproduce the style of the original 1990 JRXT.

 

 

FIBERGLASS CHASSIS

The flat fiberglass chassis mimics that of the original JRXT and provides flex for ease of driving.

 

 

FULL BALL BEARINGS

Full ball bearings support the drive train and wheels to increase efficiency and performance.

 

 

ALUMINUM SHOCKS

Aluminum shocks are included for a smooth suspension.

 

 

RETRO TRIM SCHEME

The Mini JRXT monster truck's retro trim scheme is designed to look just like the truck pictured on the 1990 original's box art.

 

Product Specifications

Battery	Included
Connector Type	EC2
Ground Clearance	1.38" (35.1 mm)
Body	Mini JRXT, Polycarbonate, Painted
Motor Size	42T, 280 Size
Brakes	Integral with ESC
Product Length	12" (305 mm)
Spur Gear	60T
Suspension	Independent, 5-Link
Differential	Bevel Gear
Receiver	Included
Charger	Included
Vehicle Size	Mini
Power Type	Electric
Product Width	8.38" (213 mm)
Radio	Included
Gear Pitch	0.5 MOD
Servos	Included
Technology	SLT Protocol
Ball Bearings	Full
Chassis	2mm Fiberglass Plate
Completion Level	Ready-To-Run
Drivetrain	2WD
Drive Type	Forward/Brake/Reverse
Product Height	5.31" (135 mm)
Pinion	15T
Scale	1/16
Product Weight	20.5 oz (580g)
Vehicle Type	Monster Truck
Motor Type	Brushed
Speed Control	Included
Wheelbase	7.75" (197 mm)

Vendor: Tekno
Type: 1/10 Short Course
Price: 449.99

Tekno SCT410SL 1/10 Super Lite Electric Short Course Truck

The Tekno RC SCT410SL Lightweight 1/10 Electric 4WD Short Course Truck Kit is a competitive, lightweight version of the proven Tekno SCT410. The chassis of this truck is made from CNC Machined 4mm Aluminum and given a black anodized finish. Light weight short course bumpers, nerf bars and body mounts finish off this ultra-light build.

The 4WD chassis features 3.5mm HD hinge pins, aluminum hinge pin braces, 13mm big bore shocks, updated spring options, a one-piece motor mount with preset gearing options, and much more. These features come together to give you a truck designed for outright performance.

• 4mm CNC Machined Black Anodized Long Wear Chassis
• Large 3.5mm HD Hinge Pins and Hinge Pin Inserts
• CNC 7075 Aluminum Hinge Pin Braces w/ Revised Suspension Geometry
• Aluminum Front and Rear Camber Plates w/ Bulkhead Brace
• 13mm Big Bore Shocks with updated Spring Options
• 18 Degree LRC Spindle Carriers
• CNC 7075 One-Piece Motor Mount w/ Preset Gearing Options
• Spindles w/ Adjustable Ackerman Plates
• Adjustable Roll Center Rear Hubs
• Strong HD Outdrives and Diff Couplers
• Accommodates 'Standard' or 'Shorty' 2S Battery Packs
• Lightweight SCT Bumpers, Nerf Bars, and Body Mounts

• (1) Tekno RC SCT410SL Short Course Truck

• 2 Channel radio/transmitter
• ESC and Pro4 SCT motor
• High torque steering servo
• 2S LiPo battery
• Compatible battery charger
• SC tires, wheels (SCTE offset) & CA glue
• SC body of your choice, paint for body
• Hex tools (1.5, 2.0, 2.5mm), nut drivers (5.0, 5.5, 7.0, 8.0mm), pliers, other tools

Vendor: Traxxas
Type: 1/10 Short Course
Price: 199.99

Slash^® 2WD Unassembled Kit

 

1/10 Scale Short Course Racing Truck Kit

The award-winning Traxxas Slash short-course RC race truck puts you in the driver’s seat for intense fender-to-fender, high-flying off-road action. The rear-wheel drive Slash is purpose-built to fly over jumps and rip full-throttle through the turns. Slash hangs it out for an all new way to challenge your driving skills. The 4-wheel independent suspension delivers a real-world driving experience for maximum fun and high-speed thrills.

The Slash Assembly Kit adds a fun and exciting dynamic to your RC experience. Build your Slash from the ground up with all the required parts and electronics included in the box. Battery and charger sold separately. You'll get the convenience of a TQ™ 2.4GHz radio system, powerful Titan® electric motor, and waterproof XL-5 electronic speed control. All the parts are organized neatly in labeled bags with a fully illustrated color manual to make building rewarding and fun. The Slash assembly kit is perfect for drivers of almost any age or skill level. Build one yourself and experience RC fun the Traxxas way—fast, fun, and easy to use!

­

WHAT'S INCLUDED IN THE KIT

­

Unassembled Slash 2WD chassis TQ™ 2.4GHz radio system Waterproof XL-5™ electronic speed control Titan® 12-Turn 550 motor Waterproof high-torque steering servo BFGoodrich Mud-Terrain T/A tires with foam inserts, mounted on satin chrome 5-spoke wheels Pre-cut clear Slash body with decals and window masking Includes custom masking decals for unique paint designs Full-color step-by-step assembly manual

­

­

 

Easy to Follow Assembly Instructions

The Slash 2WD Assembly Kit isn't just for expert hobbyists. Traxxas goes the extra mile to make the full-color instruction book easy to follow and fun to use. Each section corresponds to a labeled bag with step-by-step assembly instructions. True-to-scale part illustrations and ruler charts make it easy to differentiate between different screws, bearings, and gears. Helpful assembly tips and clear illustrations take the frustration out of the assembly process. Have fun on the workbench and in the dirt with the new Slash 2WD kit.

 

­

WHAT YOU'LL NEED

­

Battery with Traxxas High-Current Connector 6 or 7 cell NiMH battery pack 2s LiPo battery pack Battery charger Metric hex drivers 1.5 mm, 2.0 mm, 2.5 mm Basic hand tools Screwdrivers, needle nose pliers Safety glasses Polycarbonate paint

­

­

Ready to Assemble

The Slash 2WD kit arrives ready to assemble with a pre-cut clear body and full-color instruction guide to make building rewarding and fun. A staff of skilled representatives is on hand to answer your questions via phone, website, or e-mail. Unmatched parts support keeps your Traxxas vehicle running strong with parts and support from thousands of hobby dealers worldwide. Traxxas goes the extra mile to ensure that your RC experience is easy and fun.

Battery and Charger Sold Separately
Add a Traxxas Battery and Charger for a Winning Combination!

Choose performance you want!

Select the right Traxxas iD battery to fit your needs from the options below

Runtime*	15+ Minutes	20+ Minutes	30+ Minutes
Battery	2923X (1) 3000 mAh NiMH	2950X (1) 4200 mAh NiMH	2843X (1) 5800 mAh 2s LiPo

*Runtimes are estimates; actual runtime will vary due to operating conditions and driving style.

Add the Battery/Charger Completer Pack (2983) for the Ultimate Combo.

Choose your charging option

Traxxas iD Auto Battery Identification works exclusively with EZ Peak chargers

Charger	2969 2-amp NiMH charger	2970 EZ-Peak Plus	2971 EZ-Peak Live
Charging Amperage	2-amp	4-amp	12-amp

Vendor: Team Associated
Type: 1/10 4wd Buggy
Price: 399.99

As tires, motors, batteries, and tracks evolve, Team Associated adapts and improves with every iteration of the RC10!

Overview

Champions by Design

The engineers at Team Associated's Area 51 set out to extract more performance from the RC10B74 4WD buggy platform with the introduction of the RC10B74.2 and RC10B74.2D. Our goals were to reduce overall weight, lower the center of gravity, and improve jump and bump handling. We exceeded expectations.

Features

• New lightweight molded gearboxes front and rear: Two fixed height front gearboxes allowing 0 and +2mm diff height options. One rear gearbox with RC10B6-style inserts allowing 0, +1, +2, and +3mm diff height options.
• New 13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling.
• New gull wing front suspension arms and mating shock tower for lower center of gravity and better steering predictability.
• LTC differential gear sets are included. They reduce binding under power, giving more predictable power delivery.
• New battery hold-down system uses inserts to adjust weight bias. O-ring style battery strap with pull tabs.
• New larger 3.5mm turnbuckles with updated rod end style ball-cups to increase durability and reduce bind in the suspension.

• New center bulkhead fan mount that mounts the fan above the motor for better cooling performance.
• New -2mm wing mounts for use with slicks and low-profile carpet tires to further lower the center of gravity.
• +3mm aluminum steering rack for optimized bump steer at low ride heights.
• 66mm Rear CVA drive shafts and axles for more on-power traction and more predictable driving feel.
• For the RC10B74.2D: Center differential with 72T and 78T spur gear and 200,000 CST silicone diff fluid.

Overview

The RC10B74.2 and RC10B74.2D introduce molded gearboxes front and rear, which lower the center of gravity by removing weight from high points of the car. We modified the differentials to improve rolling speed through turns and increase stability on landings, allowing the buggy to corner faster on high-grip carpet and clay tracks. The latest 13mm big bore shock technology from Team Associated is included, taking the RC10B74.2 to the next level in jump and bump handling performance. The introduction of gull wing front suspension arms and the inclusion of the LTC gear sets for the differentials make the RC10B74.2 platform easier and more predictable to drive on any track condition.

Adjustable Gearboxes

New lightweight gearboxes front and rear. Two fixed height front gearboxes and one rear gearbox with adjustable inserts.

 

Lower Center of Gravity

New -2mm wing mounts for use with slicks and low-profile carpet tires to further lower the center of gravity.

 

Larger Turnbuckles

New larger 3.5mm turnbuckles with updated rod end style ball-cups to increase durability and reduce bind in the suspension.

 

Big-Bore Shocks

New 13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling.

 

Battery Hold-Down System

New battery hold-down system uses inserts to adjust weight bias. O-ring style battery strap with pull tabs.

 

Fan Mounts

New center bulkhead fan mount that mounts the fan above the motor for better cooling performance

 

Steering Rack

+3mm aluminum steering rack for optimized bump steer at low ride heights.

 

Center Slipper Clutch

2-pad high-load, high-capacity center slipper clutch with LCF pad material.

 

LTC Differential

LTC differential gear sets are included. They reduce binding under power, giving more predictable power delivery.

 

Front Suspension

New gull wing front suspension arms and mating shock tower for lower center of gravity and better steering predictability.

Product Specifications

Scale	1/10
Completion Level	Kit
Drivetrain	4WD
Drive Type	Forward/Brake/Reverse
Product Height	Varies
Vehicle Type	Buggy
Power Type	Electric
Servos	Sold Separately
Battery	Sold Separately
Internal Gear Ratio	2.50:1
Product Length	15.55" (395 mm)
Product Width	Varies
Radio	Sold Separately
Speed Control	Sold Separately
Charger	Sold Separately

Vendor: Team Associated
Type: 1/8 Truck
Price: 685.99

The latest development to come from Associated Electrics' Area 51 is designed to push boundaries of performance and build upon the number of accolades accumulated by the RC8 series.

Vendor: Team Associated
Type: 1/10 4wd Buggy
Price: 449.99

As tires, motors, batteries, and tracks evolve, Team Associated adapts and improves with every iteration of the RC10!

Overview

Champions by Design

The engineers at Team Associated's Area 51 set out to extract more performance from the RC10B74 4WD buggy platform with the introduction of the RC10B74.2 and RC10B74.2D. Our goals were to reduce overall weight, lower the center of gravity, and improve jump and bump handling. We exceeded expectations.

Features

• New lightweight molded gearboxes front and rear: Two fixed height front gearboxes allowing 0 and +2mm diff height options. One rear gearbox with RC10B6-style inserts allowing 0, +1, +2, and +3mm diff height options.
• New 13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling.
• New gull wing front suspension arms and mating shock tower for lower center of gravity and better steering predictability.
• LTC differential gear sets are included. They reduce binding under power, giving more predictable power delivery.
• New battery hold-down system uses inserts to adjust weight bias. O-ring style battery strap with pull tabs.
• New larger 3.5mm turnbuckles with updated rod end style ball-cups to increase durability and reduce bind in the suspension.

• New center bulkhead fan mount that mounts the fan above the motor for better cooling performance.
• New -2mm wing mounts for use with slicks and low-profile carpet tires to further lower the center of gravity.
• +3mm aluminum steering rack for optimized bump steer at low ride heights.
• 66mm Rear CVA drive shafts and axles for more on-power traction and more predictable driving feel.
• For the RC10B74.2D: Center differential with 72T and 78T spur gear and 200,000 CST silicone diff fluid.

Overview

The RC10B74.2 and RC10B74.2D introduce molded gearboxes front and rear, which lower the center of gravity by removing weight from high points of the car. We modified the differentials to improve rolling speed through turns and increase stability on landings, allowing the buggy to corner faster on high-grip carpet and clay tracks. The latest 13mm big bore shock technology from Team Associated is included, taking the RC10B74.2 to the next level in jump and bump handling performance. The introduction of gull wing front suspension arms and the inclusion of the LTC gear sets for the differentials make the RC10B74.2 platform easier and more predictable to drive on any track condition.

Adjustable Gearboxes

New lightweight gearboxes front and rear. Two fixed height front gearboxes and one rear gearbox with adjustable inserts.

 

Lower Center of Gravity

New -2mm wing mounts for use with slicks and low-profile carpet tires to further lower the center of gravity.

 

Larger Turnbuckles

New larger 3.5mm turnbuckles with updated rod end style ball-cups to increase durability and reduce bind in the suspension.

 

Big-Bore Shocks

New 13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling.

 

Battery Hold-Down System

New battery hold-down system uses inserts to adjust weight bias. O-ring style battery strap with pull tabs.

 

Fan Mounts

New center bulkhead fan mount that mounts the fan above the motor for better cooling performance

 

Steering Rack

+3mm aluminum steering rack for optimized bump steer at low ride heights.

 

Center Slipper Clutch

2-pad high-load, high-capacity center slipper clutch with LCF pad material.

 

LTC Differential

LTC differential gear sets are included. They reduce binding under power, giving more predictable power delivery.

 

Front Suspension

New gull wing front suspension arms and mating shock tower for lower center of gravity and better steering predictability.

Product Specifications

Scale	1/10
Completion Level	Kit
Drivetrain	4WD
Drive Type	Forward/Brake/Reverse
Product Height	Varies
Vehicle Type	Buggy
Power Type	Electric
Servos	Sold Separately
Battery	Sold Separately
Internal Gear Ratio	2.50:1
Product Length	15.55" (395 mm)
Product Width	Varies
Radio	Sold Separately
Speed Control	Sold Separately
Charger	Sold Separately

Vendor: Tekno
Type: 1/8 Scale Buggy
Price: 599.99

The Tekno RC EB48 2.1 4WD Competition 1/8 Electric Buggy Kit takes notes from the NB48 2.1 platform and gives racers a serious contender for the E-Buggy class. This buggy shares many of the features found on the NB48 2.1, as well as electric-specific improvements. Bringing over improvements found on the 2.0 chassis, this buggy features revised shock towers, Ackerman spindle plates, a tall wing mount, more durable gearboxes, and chassis braces. Get the Tekno EB48 2.1 and experience a buggy that can be competitive at all levels of RC racing!

The rear arms have been extended to 112mm in length and use hubs with adjustable roll centers. Tekno RC updated the chassis with lowered hinge pins braces to improve overall handling. The front-end geometry is one of the biggest changes to the 2.1 platform. By lengthening the front camber links to nearly the length of the arm Tekno greatly improved stability and predictability.

NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.

Features:

• Revised 4mm CNC 7075 Aluminum Hard Anodized Lightened Chassis
• Updated CNC 7075 LRC Pivot Blocks All-Around
• Updated CNC 7075 Long Link Spindle Carriers
• Updated NC 7075 Rear Shock Tower w/ Adjustable Wingmount Height
• 3 Fluid Filled Differentials Tuneable to Any Track Condition
• Longer Rear Arms w/ Outer Steel Sleeves
• Rear Hubs w/ Adjustable Roll Center
• Spindles w/ Adjustable Ackerman and Axle Height
• 16mm Bore Extra Long Stroke Shocks Front and Rear

• (1) Tekno RC EB48 2.1 4WD 1/8 E-Buggy Kit

• 2-channel radio/transmitter
• Transmitter batteries
• 1:8 scale speed control
• 1:8 scale motor, and pinion (see motor manufacturer's gearing recommendations for correct pinion size)
• High-torque steering servo
• 4S LiPo battery and charger
• 1:8 scale buggy tires & wheels
• CA (Cyanoacrylate) glue
• Polycarbonate-specific paint for body
• Thread-locking compound
• Tools
• Mod 1 pinion gear

Vendor: TLR
Type: 1/10 2wd Buggy
Price: 579.99

Even though the 22X-4 won the ROAR Nationals, the next generation is hot on its heels. The Team Losi Racing® 22X-4 Elite Race Kit has everything that made the 22X-4 a podium pleaser and more.

• Center Diff Included
• Aluminum Option Parts Included
• Geometry Updates
• Tab Style Battery Mount
• Center Diff Fan Mount

In The Box

• (1) Team Losi Racing® 22X-4 Elite Race Kit
• (1) User Manual

Needed to Complete

• (1) Transmitter and Receiver
• (1) Steering Servo
• (1) 2S LiPo Shorty Battery
• (1) Compatible LiPo Battery Charger
• (1) 48P Pinion Gear
• (1) Motor
• (1) ESC
• (1) Tire Glue
• (4) Tires
• (4) Wheels
• Polycarbonate Paint
• Tools (Please reference the manual for more details)

Features

• Center Diff Included
• Pro Level Ready
• Aluminum Option Parts Included
• Geometry Updates
• Tab Style Battery Mount
• Center Diff Fan Mount
• Titanium Turnbuckles
• G3 V2 3mm Shaft Shocks
• Gear Diffs

• Adjustable Inner Pivots
• V2 Floating Servo Mount
• Optimized Composites
• Adjustable Motor and Battery Position
• 22X-4 Lightweight Body
• Carbon Fiber Optimized
• All Metric Hardware
• TLR 6.5" Rear Wing
• Easy Access Diffs

Destined For Greatness

Even though the 22X-4 won the ROAR Nationals, the next generation is hot on its heels. The Team Losi Racing^® 22X-4 Elite Race Kit has everything that made the 22X-4 a podium pleaser and more. The Elite level kit includes popular option parts like a center diff, aluminum drag link, carbon fiber electronic mounting plates, carbon wing washer, aluminum locknuts, and titanium turnbuckles to lighten and optimize the 22X-4 to maximize performance. Designed to win straight out of the box, the 22X-4 ELITE Race Kit is tough to beat with features and performance destined for the top of the podium.

Video Overview

 

TLR 22X-4 ELITE

 

 

 

 

Center Diff Included

The most popular tuning option for the 22X-4 has been the change to a center diff, especially for dirt and clay tracks. So of course, the 22X-4 ELITE would not be truly ELITE without the center diff included.

 

 

Pro Level Ready

Including all of the key option parts that our factory team uses to win races across the world, the 22X-4 ELITE is truly Pro Level Ready from a kit build right out of the box... more so than any 4wd buggy kit ever offered. Parts include Carbon Fiber, Black Anodized Aluminum and Titanium turnbuckles. The option parts and upgrades included value at $130.

 

 

Aluminum Option Parts Included

As the team has found many of the optional aluminum parts for the 22X-4 to improve maintenance or performance, we've included those in the kit as well. Aluminum parts included are the drag link, caster blocks, all four inner pivots, motor mount, front and rear hexes, ball stud washers, and aluminum nuts throughout.

 

 

Geometry Updates

The 22X-4 was an all-new car, and after racing it around the world for the last couple years, we've found ways to make it even better. Additional shock mounting locations, inner camber link locations, smoother ackermann and steering gain locations all just keep getting the 22X-4 ELITE easier and easier to drive faster and faster.

 

 

Tab Style Battery Mount

Keeping the battery in while you're running, and getting it out easy when it's time to charge is just something we thought we could do better. Carbon tabs hold the battery down, with adjustable height to accommodate any battery, thin or standard height. Easy in, secure while running, easy out, done.

 

 

Center Diff Fan Mount

The prevalence of high grip tracks and the 13.5 4wd class have led to the need for many racers to run motor fans to keep temperatures in check. Rather than an aluminum mount, or double-sided tape, the 22X-4 ELITE includes a molded fan mount secured to the center diff to blow air directly down into the motor for the coolest temps the most power.

 

 

Titanium Turnbuckles

Titanium turnbuckles have always been a premium upgrade for race vehicles, and we just couldn't do the 22X-4 ELITE without them. Included are titanium turnbuckles throughout the buggy to save weight and increase performance.

 

 

G3 V2 3mm Shaft Shocks

The G3 V2 shocks give the 22X-4 the plush handling and consistent, leak-free bleed with some ease of use improvements. No more e-clips as the pistons are now secured by screws, new shock caps and shock bodies increase the spring collar height by 3mm to accommodate lower ride heights, new eyelets and spring cups provide -3mm, 0mm and +4mm spring cup off-sets and paired with all new eyelets will never pop off with the screw in feature.

 

 

Gear Diffs

Designed to be light and durable, the 22X-4 is designed with large volume bevel gear diffs for the ultimate in performance and durability. The kit includes all metal diff internals and ring gear, but TLR has you ready also with composite diff internals and ring & pinion gears available as option parts.

 

 

Adjustable Inner Pivots

Included for the front and rear, the adjustable inner pivots give multiple adjustments for anti-squat, kick up, toe, sweep, pivot width, and roll center. This gives the 22X-4 ELITE the windows needed to get it dialed in for any driver, any track and any surface.

 

 

V2 Floating Servo Mount

To keep the servo mounting from affecting the chassis flex, the servo is mounted hanging above the chassis. The mount only secures to the chassis near the chassis centerline, then uses rigid 2.5mm carbon fiber to support the weight and leverage of the servo to optimize steering performance and chassis flex. The V2 version also accommodates all servo off-sets.

 

 

Optimized Composites

The balance and consistency of the 22X-4 ELITE can be tuned using different composite materials in key parts throughout the vehicle. The kit included the parts the race team prefers: Standard front and rear suspension arms, soft mudguards, and standard chassis braces.

 

 

Adjustable Motor and Battery Position

Continuing the theme of maximum adjustment, the 22X-4 ELITE allows for the center differential and motor mount assembly to be mounted in either front and rear positions, with 7mm of adjustment between them. The battery also has an additional 9mm of adjustment for solid changes to front/rear weight balance without the need to increase the static weight.

 

 

22X-4 Lightweight Body

Sleek, stylish, and lightweight, the 22X-4 body design is the perfect match to the chassis. It looks sleek and fast, is nice and low but provides excellent balance and stability - the best of all worlds.

 

 

Carbon Fiber Optimized

Carbon fiber is extremely light and very rigid, giving it a great strength to weight ratio. It is optimal for many parts of an r/c car, the and 22X-4 ELITE has it mounted in all the key spots: Front Shock Tower, Rear Shock Tower, Center Diff Mount, Front Chassis Brace, Rear Chassis Brace, Front Steering mount, Servo Mount, and Electronics Mounting Plates.

 

 

All Metric Hardware

Using all metric hardware make it easy to find replacement screws, nuts and washers, and helps to limit the number to tools required in the toolbox.

 

 

TLR 6.5" Rear Wing

Pulled from ultra-durable 1.2mm polycarbonate, the TLR 6.5" rear wing isn't new for the 22X-4 ELITE. Instead, this wing has proven itself as the longest lasting and most stable rear wing available for 1/10 buggies over the past few years - and it comes in your kit.

 

 

Easy Access Diffs

Designed to be user-friendly, the 22X-4 ELITE allows the front and rear diffs to both be removed by only removing 4 screws and loosening 2 set screws. Out in less than a minute, and back in just as quickly.

 

 

 

Product Specifications

Ball Bearings	Full Rubber Sealed Ball Bearings
Chassis	2.5mm Milled Plate, 7075-T6 Aluminum
Completion Level	Kit
Drivetrain	4WD
Product Height	5.8" (147 mm)
Vehicle Type	Buggy
Approximate Assembly Time	3-5 Hours
Wheelbase	11.2" (284 mm)
Body	22X-4, 0.7mm Lightweight, Clear
Scale	1/10
Power Type	Electric
Gear Pitch	48-pitch
Differential	Oil Filled, Gear Differentials
Shock Type	12mm Big Bore, Oil Filled
Product Length	14" (356 mm)
Spur Gear	78T, 81T
Suspension	Lower A-Arm, Upper Adjustable Link
Product Width	9.8" (249 mm)

Vendor: TLR
Type: 1/8 Truck
Price: 749.99

The original 8IGHT-X ushered in a new era of TLR^® 1/8 scale buggies. The Team Losi Racing^® 8IGHT-X/E 2.0 Race Kit takes everything we've learned and applied it to this new platform to make this the fastest and easiest to drive TLR 1/8 buggy yet.

• All Nitro and Electric parts included in one box
• Center Diff Setup offering more rigidity and is lighter
• Radio Tray updated for better balance
• Stronger Insert/Truss Suspension Arms
• Updated Suspension Geometry

In The Box

• (1) Complete 1/8 8ight-X/E 4WD Kit

Needed to Complete

• (1) Transmitter and Receiver
• (1) Steering Servo
• (1) Compatible Battery Charger
• (1) Tire Glue
• (4) Tires
• Polycarbonate Paint
• Tools (Please reference the manual for more details)
• For Electric Power:
• (1) Brushless Motor
• (1) Brushless ESC
• (1) 4S 14.8V LiPo Battery
• For Nitro Power:
• (1) Nitro Engine and Tuned Pipe
• (1) Receiver Battery
• (1) Receiver Switch
• (1) Throttle Servo
• (1) Fuel Bottle
• (1) 20-30% Nitro Fuel
• (1) Starter Box

Features

• Rear Adjustable Hubs
• Square Insert Pills and Narrower Rear Pivots
• 7075 3mm Aluminum Chassis
• Center Diff Setup offering more rigidity and is lighter
• Brake Setup provide more consistent force and feel
• Tunable Front and Rear Shock Tower
• Cab Forward Style Body
• Nitro and Electric Ready
• Updated Front Spindles
• Front and Rear Universals for smoother turns
• Aluminum Wheel Hexes
• Radio Tray updated for better balance

• Adjustable Steering Rack
• Adjustable Wing Mount
• Optimized Shocks
• Stronger Insert/Truss Suspension Arms
• Updated Gear Differential
• Updated Suspension Geometry
• Larger Pinion Bearing
• Adjustable Caster Blocks
• Sway Bar System for consistent suspension
• Updated Chassis Side Guards for more protection
• Bleeder Shock Caps
• Better Diff Access

Never Settle For Second Place

The original 8IGHT-X ushered in a new era of TLR^® 1/8 scale buggies. The Team Losi Racing^® 8IGHT-X/E 2.0 Race Kit takes everything we've learned and applied it to this new platform with incredible attention to detail to make this the fastest and easiest to drive TLR 1/8 buggy yet. With the 8IGHT-X/E 2.0, drivers achieve the next level of performance, drivability, and speed. This Team Losi Racing Race Kit has updated everything that made it a regular on the podium including the drivetrain, suspension geometry, and chassis layout. The 8IGHT-X/E 2.0 can be driven harder and with more pace and is a fantastic vehicle right out of the box for all levels of consumers. It includes all the desired factory team option parts and uses common metric hardware for worldwide appeal. Plus, it includes the parts needed to build the vehicle either as Nitro or Electric in a one-box purchase. Team Losi Racing is always pursuing excellence, the 8IGHT-X/E 2.0 Race Kit is the one to beat with features and performance destined for podium greatness.

Video Overview

 

 

Nitro and Electric Ready

All of the parts needed to run either nitro or electric are included in one box.

 

 

Rear Adjustable Hubs

The rear hubs on the 8IGHT-X/E 2.0 have an updated pin location as well as are now height adjustable in more increments for fine-tuning and maximum rear grip

 

 

Square Insert Pills and Narrower Rear Pivots

All pivot mounts have been updated to use square pills to offer more tunability. The rear pivots are now narrowed to improve the front to rear roll of the car and provide more rear grip in all situations and better-balanced front to rear.

 

 

7075 3mm Aluminum Chassis

The chassis is new to the 8IGHT-X/E 2.0 and is made from 7075 3mm thick aluminum and hard anodized for the best wear possible. The chassis is also milled out deeper to allow for more flex and the lightest 1/8 chassis to date.

 

 

Center Diff Setup

The center diff mount is a new molded composite piece offering more rigidity and the new integrated mount for the throttle servo is lighter. The E buggy side will be handled using an updated center diff setup from the 8XT.

 

 

Brake Setup

The brake cams have been updated and the brakes are now freer and provide better and more consistent braking force and feel.

 

 

Front and Rear Shock Tower

The rear shock tower works with the new rear gearbox and pivots. The front shock tower is shorter to decrease the front chassis roll as well as lower the CG. Both have been lightened, new camber link mounting positions, as well as shock mounting positions to provide the tunability and durability racers, are looking for.

 

 

Better Diff Access

The front and rear diff case have been altered to allow easier access to the differentials without removing the bulkheads from the vehicle. The rear diff case has been updated to allow for the new C and D pivot blocks.

 

 

Cab-Forward Style Body

A cab-forward design helps with overall downforce, which improves steering and overall stability. The body comes precut for ease of mounting.

 

 

Front Spindles

The 8IGHT-X/E 2.0 spindles have been updated to use 3mm screws for the steering arm for increased reliability.

 

 

Front and Rear Universals

The 8IGHT-X/E 2.0 includes universals for the front and rear which are shorter and lighter which makes the car smoother in existing turns and aids in the flow in bumpy track conditions.

 

 

Aluminum Wheel Hexes

The wheel hexes in the 8IGHT-X/E 2.0 have been optimized for use with this updated platform. They are hard-anodized aluminum for durability and weight savings.

 

 

Radio Tray

The steering servo has been moved in and forward to provide a better balance to the car. For the E version, the updated steering servo mount has an integrated ESC mount to get the ESC forward in the car.

 

 

Steering Rack

The steering rack allows more Ackerman adjustments and an improved servo saver to eliminate bellcrank bind during high loads. Also, the rear mounting points moved in and back allowing the drag link to sway back for a more linear steering feel.

 

 

Wing Mount

8IGHT-X/E 2.0 uses the wing mount from the 8IGHT-X Truggy that offers different heights and positions for ultimate traction control.

 

 

Optimized Shocks

The 8IGHT-X shocks are optimized and lightened to decrease the center of gravity and lower the weight of the car and will include 3.5mm shock shafts. The shock pistons have been altered to allow more blow-by to aid in bump handling.

 

 

Insert/Truss Suspension Arms

Long front and rear arms provide great bump handling and stability. The arms are stronger using a truss-style base as well as upper stiffener plates to adjust flex for full tuning abilities. Bushings are used for the inner hinge pin area to provide a worry-free, smooth function at all times.

 

 

Gear Differential

All three gear differentials now include V2 HD diff cases with composite pin holders, V2 O rings, lightened sun gears, and F/R high traction outdrives. Which provides more grip and a consistent feel throughout the entire run along with quicker acceleration and longer run times.

 

 

Suspension Geometry

The 8IGHT-X/E 2.0 next-generation suspension geometry has further been updated making a car that is fast, nimble, and even easier to drive. This includes a myriad of updates including, a wider front pivot with less scrub radius, narrower rear pivot, and updated hub offset, longer suspension arms, and more suspension mounting locations.

 

 

Adjustable Caster Blocks

17.5 deg caster blocks are included that allow the height of the spindle to be adjusted up and down for high-speed stability.

 

 

Sway Bar System

The sway bar system has collars that eliminate side to side play to provide a more consistent suspension package.

 

 

Chassis Side Guards

The chassis side guards have been updated to allow for more room as well as moved back 3mm to provide for tire expansion. The E-Buggy side now has the battery tray molded into the side guard for a lower center of gravity and lighter weight.

 

 

Bleeder Shock Caps

Machined aluminum shock caps with threaded bleeder holes for easy and consistent bleeding of oil. Bladders and Emulsion seals are included for tuning to your track conditions and driving style.

 

Product Specifications

Product Weight	Varies on equipment used
Ball Bearings	Full Set
Chassis	3mm, 7075 T-6 Aluminum, Hard Anodized
Completion Level	Kit
Drivetrain	4WD
Product Height	6.69" (170 mm)
Wheel Hex Size	17mm
Spur Gear	47T
Suspension	Independent
Wheel Width	1.7" (42mm)
Ground Clearance	1.1 in (27mm)
Internal Gear Ratio	3.23:1
Battery	Sold Separately
Fuel Tank Capacity	125CC (4.2oz) - Nitro Only
Product Length	18.9" (480 mm)
Approximate Assembly Time	3-5 Hours
Body	8X/E 2.0 Unpainted
Brakes	Semi-Metallic Pad with Steel Disc
Pinion	13T
Scale	1/8
Radio	Sold Separately
Front Track	12.1 in (308mm)
Product Width	12.1" (307 mm)
Power Type	Electric/Glow
Gear Pitch	MOD1
Servos	Sold Separately
Speed Control	Sold Separately
Wheelbase	12.7" (323 mm)
Final Drive Ratio	11.68:1
Rear Track	12.0 in (306mm)
Charger	Sold Separately
Differential	Sealed viscous filled gear differential
Receiver	Sold Separately
Shock Type	Aluminum Oil Filled

Vendor: Team Associated
Type: 1/10 2wd Buggy
Price: 349.99

The RC10B6.4 platform continues the trend of offering two kit configurations. Both kits include the next generation 13mm diameter big-bore shocks and springs to provide the ultimate in damping and stability. The larger diameter shocks reduce pressure inside the shock and minimize the effects of the shaft displacement. This allows the buggy to feel like it's riding on an invisible cloud when you hit harsh jumps and landings. The chassis, front end, and steering system is optimized for running reduced caster and kickup, which excels on high speed, high grip surfaces. An updated steering system with adjustable height bellcranks helps racers minimize bumpsteer. In addition, the front suspension is equipped with new -1mm kingpin offset steering and caster blocks for smooth and predictable front end feel through the entire throw. The -1mm design pushes the steering pivot closer the center of the front tire, keeping the front end flat through the entire steering throw.

Both buggies are equipped with a new chassis layout and ESC weights that allow forward mounted electronics closer to the servo, as well as additional forward battery placement over the previous model. All of the new weight tuning options allow for more high-speed stability and on-power steering on high grip carpet. The #90034 RC10B6.4 Team Kit will be the buggy of choice for high grip carpet or turf track surfaces with the new +3mm chassis layout, 11mm Octalock LCF slipper clutch setup, steel ESC and servo weights, and included anti-roll bars front and rear. The #90035 RC10B6.4D Team Kit includes a new dirt-length chassis, 19mm Octalock LCF slipper clutch setup, aluminum ESC weight, layback gearbox, and an optimized dirt kit setup.

Both cars share many great features, such as an easy-access rear differential, new wide pivot rear aluminum arm mounts for use with 73mm arms and 69mm CVA bones, and updated carbon fiber shock towers with molded protective covers. The setups and tuning parts remain interchangeable between the two configurations. Both versions come with the speed, durability and lineage expected of a true champion. Choose the configuration that suits your track and conquer the competition!

New Features

• New 13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
• New dirt length aluminum chassis with 22.5deg. kick-up to complement updated front-end geometry and with new shape to reduce chassis scrub with the track surface
• 20deg, 22.5deg, and 25deg molded bulkheads included for a complete range of caster and kickup options
• New adjustable height steering bellcrank and rack system for optimized bumpsteer at all ride heights and caster angles
• New -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
• New steel RC10B6.4 ESC mounting tray shifted forward in the chassis and with a wider footprint to fit electronics, resulting in a further forward weight bias
• New front ballstud mount, top plate, and front wing mount to account for the kickup angle change
• New chassis side rails with three fan mount locations to choose from depending on chassis length and transmission used
• New caged thrust bearing for ball differential
• New cab-forward design RC10B6.4 bodyshell offered in standard (kit) and lightweight (optional) thickness

Legacy Features

• 4mm carbon fiber front and rear shock towers with molded protective covers
• Aluminum servo mounting system with direct-to-chassis mounts and molded brace with transponder mounting location
• Octalock spur gear and 19mm Octalock LCF pads
• Wide pivot rear aluminum arm mounts for use with 73mm arms and 69mm CVA bones gives more predictable rear traction and an easy-to-drive rear-end feel. Also compatible with 75mm optional arms using the narrowest insert settings.
• Symmetric rear arms with improved geometry and stiffness that can be flipped to allow a "split" for rear shock mounting position. Arms are available in 73mm and 75mm lengths (73mm included)
• Rear hub assembly with modular vertical ball stud camber link mounts and axle height adjustments for precise roll center adjustments
• Outer rear hinge pins captured with bolt head and locknut for increased durability
• Clear body and clear wing included
• Front wing mount and front wing included
• Rod end battery brace parts and hardware included in kit
• Molded wire clips included for motor and ESC wires
• +1 carbon fiber steering arms
• Black steel LP serrated wheel nuts
• 69mm CVA bones for reduced bone plunge and minimized friction at drive pin
• Aluminum electronics plate included for improved mass balance and lower overall center of mass
• 5mm aluminum clamping wheel hexes
• Ball differential included
• Lay-down and Lay-back transmission assemblies included for tuning mass balance to different track surfaces
• Adjustable differential height to allow drive shaft alignment through all ride height & axle height configurations
• Shocks include X-rings for low friction assembly
• Aluminum rear ballstud mount with three link positions options for maximum adjustability and added strength
• Lightweight aluminum one-piece top shaft and gear
• Factory Team ball bearing set with 24 precision ball bearings, now oiled instead of greased for more efficient drivetrain
• b6.4

Vendor: Team Associated
Type: 1/8 Nitro Buggy
Price: 599.99

Key Features

• New rear hub design for adjustable roll centering
• New captured CVA drive shafts design front and rear with center dogbone driveline
• New body shell designed by Area 51 for aggressive looks, functional performance, and lasting durability
• Fuel tank with an ergonomically designed lid puller

In The Box

• (1) RC8B4 Team Kit

Needed to Complete

• (1) Transmitter & Receiver
• (1) .21 Class Rear Exhaust Motor
• (1) Suitable Exhaust System
• (2) 1/8 Scale Servos
• (4) Wheels and Tires
• (1) Receiver Battery
• Assorted Assembly Tools
• Lexan Body Paint
• Suitable Battery Charger

PUSHING THE BOUNDARIES

1:8 scale off road racing is one of the hobby’s most challenging disciplines; it requires a high standard and demands attention to detail. The latest development to come from Associated Electrics’ Area 51 is designed to push boundaries of performance and build upon the number of accolades accumulated by the RC8 series.

RC8B4e Kit Features

• Innovative front-end geometry with reduced inclined kingpin steering blocks are paired with a new wider upper suspension arm pivot for improved steering balance and predictable handling in all conditions
• New gearboxes are specific to front and rear with larger 6x13x5 mm flanged bearing sizes resulting in longer life of ring and pinion gears. The front gearbox has an inclined pinion gear angle to straighten the center driveshaft for increased drivetrain efficiency and reduced phasing and vibration while the rear gearbox remains flat.
• Front and rear suspension arms engineered to accommodate a wide range of flex and stiffnesses
• One-piece anti-roll bar links mounted in-line with anti-roll bar with BHC for simplified assembly
• Front upper arms include a unique molded “wing” insert for increased front-end downforce
• New rear wing mount has adjustable wing angle shims, significant strength improvements, an aerodynamic shape, and extra clearance for shock position adjustment
• The adjustable rear wing has more vertical fins for increased straight-line stability, a taller rear wicker lip height for increased downforce and increased strength in various areas to reduce bending fatigue
• New rear chassis brace is mounted centrally to the gearbox, which reduces material fatigue, centralizes shear forces, and improves the life of rear end drivetrain parts while allowing for three different chassis flex options

• New rear hub features a symmetrical left and right common design with axle height inserts for adjustable roll center tuning
• New captured CVA drive shafts design front and rear with center dogbone driveline
• Fuel tank with an ergonomically designed lid puller, quick reference fuel markings and 1-, 2-, and 3cc stackable inserts for volume adjustment at sanctioned events
• Carbon fiber front top plate centralizes the front chassis brace for balanced flex in all directions
• New body shell designed by Area 51 for aggressive looks, functional performance, and lasting durability
• V3 differentials with 42T ring and 12T pinion gears for improved gear ratios
• RC8B3.2 side guards that thread into the chassis from the top side of the car
• RC8B3.2 radio tray: battery and receiver box with removable transponder mount
• RC8B3.2 split center diff mounts with aluminum center top plate
• 16mm shocks equipped with locking spring cups and rod ends in improved material, V2 springs, ‘stiff’ style shock bladder, combination bleeder/emulsion caps, and blue aluminum threaded collars
• RC8B3.2 narrow C and D arm mounts
• 4-shoe aluminum clutch with two composite and two aluminum shoes, optimized clutch springs, and steel 13T clutch bell

 

Improved Wing

Wing has vertical fins and a taller rear lip for increased straightline stability and downforce.

 

 

Improved Wing Mount

Wing mount features adjustability with angle shims, strength improvements, and aerodynamic shape.

 

 

Improved Shocks

16mm shocks equipped with improved material for locking spring cups and camber link rod ends.

 

 

New Chassis Brace

New rear chassis brace is mounted centrally to the gearbox, which reduces material fatigue.

 

 

Improved Suspension Arms

Front and rear suspension arms engineered with optimal flex and stiffness.

 

 

Racing Fuel Tank

Fuel tank with ergonomically designed lid puller, high capacity, and quick reference fuel markings.

 

 

Anodized Aluminum Chassis

7075 aluminum hard anodized chassis features updates to strengthen the front and rear droop tab areas.

 

 

Improved Front Geometry

Innovative front-end geometry and new 8-Degree kingpin steering blocks.

 

 

Improved Differentials

New front and rear gearbox designs are engineered for better drivetrain efficiency.

 

 

Innovative Design

Front upper arm includes a unique optional molded "wing" insert for increased front-end downforce.

 

Product Specifications

Vehicle Type	Buggy
Charger	Sold Separately
Receiver	Sold Separately
Shock Type	Aluminum
Battery	Sold Separately
Motor Size	.21 Class Rear Exhaust (Sold Separately)
Product Length	19.13" (486 mm)
Product Width	11.99" (305 mm)
Radio	Sold Separately
Chassis	Aluminum
Completion Level	Kit
Drivetrain	4WD
Wheel Hex Size	17mm
Servos	Sold Separately
Body	Buggy, Unpainted, Uncut
Brakes	Disk
Scale	1/8

Vendor: Losi
Type: 1/16 Scale
Price: 139.99

The legendary Losi® Mini's are back! The Losi® Mini-B Pro Roller offers racers a chance to customize and finish their Mini-B the way they want.

• Top Five Option Parts Pre-installed
• Scaled Down Version of the 1/10 TLR® 22 Buggy
• Mid Motor Configuration
• Taper Pin Front and BK Bar Rear Tires with Dish Wheels
• 1.5mm Aluminum Chassis

In The Box:

• (1) Losi® Mini-B Pro Roller: 1/16th 2WD Buggy
• (1) 18T Pinion Gear
• (1) Decal Sheet
• (1) 1.5mm L Wrench
• (1) 2mm L Wrench
• (1) 4-way Cross Wrench

Needed to Complete:

• (1) Steering Servo
• (1) ESC
• (1) Motor
• (1) Receiver
• (1) Radio
• (1) Battery
• (1) Battery Charger
• (1) Paint

Key Benefits

• Enhanced Performance: Top five aluminum parts included
• Build It Your Way: Choose your own electronics
• TLR^® 22 Design: Based on the TLR 22 national champion

Features

• Scaled Down Version of the 1/10 TLR^® 22 Buggy
• Mid Motor Configuration
• 1.5mm Aluminum Chassis
• TLR^® 22 Suspension Geometry
• Taper Pin Front and BK Bar Rear Tires with Dish Wheels

• 7mm Bore, Aluminum Threaded Oil Filled Shocks
• Aluminum Servo Arm
• Aluminum Bellcranks and Drag Link
• Aluminum Front Pivot Block
• Full Ball Bearings (less steering)
• Option Parts Availability

The Mini Class Revolution

The legendary Losi^® Mini's are back! Featuring TLR^® 2WD buggy engineering and performance in a 1/16th package, the Losi Mini-B Buggy Roller is terrain-tearing and track-ready. The Mini-B Pro Roller offers racers a chance to customize and finish their Mini-B the way they want by adding their own electronics, motor, and more. The 1/16th scale is stable on the track generating quicker speeds and improved handling. With suspension geometry from the TLR^® 22 platform and the inclusion of aluminum chassis, shocks, servo arm, bellcranks, and front pivot block, you get more from a Mini than ever before. Everything about this buggy is designed to give racers what they've asked for and deliver the kind of impressive experience drivers expect from Losi.

Video Overview

 

 

Scaled-Down Version

Featuring TLR 2WD buggy engineering and performance in a 1/16th package, the Losi Mini-B Buggy is terrain-tearing and track-ready. The 1/16th scale is stable on the track generating quicker speeds and improved handling.

 

 

Mid Motor Configuration

Having the motor mid ship mounted, not only replicates the 1/10th version, but also provides a better-balanced chassis. This allows for a much better performance on multiple surfaces balancing out steering and traction.

 

 

7mm Bore, Aluminum Threaded Oil Filled Shocks

The aluminum shocks feature threaded shock collars, allowing for easy preload/ride height adjustments. Additionally, the shock bodies feature a bottom loading, re-buildable shock cartridge with dual o-rings to help keep the oil in the shocks. Also features a 2-hole shock piston to control the dampening.

 

 

Aluminum Servo Arm

Improves steering response (exclusively for the Spektrum^™ SPMSSX107 Servo).

 

 

Aluminum Bellcranks and Drag Link

Improves durability and reduces flex while adding to the aesthetics of the chassis.

 

 

Aluminum Front Pivot Block

Improves durability and stiffness between the front hinge pins.

 

 

Aluminum Chassis

The Mini-B has been designed with a 1.5mm thick Aluminum chassis plate. The aluminum chassis provides more strength and durability while vastly improving performance.

 

 

TLR 22 Suspension Geometry

All suspension geometry has been derived from the 22-platform providing balanced steering and traction form the optimized design.

 

 

Taper Pin Front Tires

Mounted on dish wheels, the Taper Pin front tires replicate one of the most popular tires from Losi.

 

 

BK Bar Rear Tires

Mounted on dish wheels, the BK Bar rear tires replicate the popular tires from Losi.

 

 

Full Ball Bearings

Transmission and axles have ball bearings that help things run smoother and last longer.

*Less steering bell crank

 

 

Full line of Option Parts

The Mini-B has a full line of option parts available including aluminum upgrades, a brushless motor, and much more.

 

Product Specifications

Power Type	Electric
Speed Control	Sold Separately
Gear Pitch	.5MOD
Servos	Sold Separately
Wheelbase	7.5" (191 mm)
Charger	Sold Separately
Differential	Bevel Gear
Receiver	Sold Separately
Shock Type	7mm Bore, Oil Filled
Chassis	1.5mm Aluminum Chassis
Completion Level	Roller
Drivetrain	2WD
Product Height	4" (102 mm)
Body	Mini-B, Clear Polycarbonate
Scale	1/16
Ball Bearings	Complete (Less Steering)
Vehicle Size	Mini
Product Width	7" (178 mm)
Radio	Sold Separately
Battery	Sold Separately
Internal Gear Ratio	2.714
Product Length	10.7" (272 mm)
Spur Gear	60T
Suspension	Independent
Vehicle Type	Buggy

Vendor: Arrma
Type: 1/8 Scale Buggy
Price: 419.99

Loaded with high-end parts to improve durability and handling, the 1/8 scale TLR® Tuned TYPHON™ 4WD Race Buggy Roller gives bashers the perfect platform for stepping into the worlds of racing and chassis tuning. Just add your choice of electronics!

Key Features

• TLR-Tuned Parts
• Race Spec Finished Body
• Durable 7075 T6 Aluminum chassis and shock towers
• All-metal Diff Outdrives And Gearbox Internals
• High-traction dBoots® Exabyte Tires

In The Box

• (1) ARRMA® TLR® Tuned TYPHON™ 1/8 Race Buggy 4WD Roller
• (1) Product Manual

Needed to Complete

• (1) ESC
• (1) Motor
• (1) Pinion
• (1) Transmitter
• (1) Receiver
• (1) Steering Servo
• (1) Battery
• (1) Charger

TLR^® Tuned Features

• TLR^® Tuned 7075-T6 Laser-Etched Aluminum Chassis Plate
• TLR^® Tuned 7075-T6 Laser-Etched Aluminum Front and Rear Shock Towers
• TLR^® Tuned 7075-T6 Laser-Etched Aluminum Steering Rack
• TLR^® Tuned Laser-Etched Aluminum Lower Adjustable Suspension Hangers
• TLR^® Tuned Laser-Etched Aluminum Upper Adjustable Suspension Hangers
• TLR^® Tuned Laser-Etched Aluminum Shock Bodies

Features

• Strong front and rear composite chassis braces
• Strong composite chassis side pods
• Rear suspension dirt guards
• Oil-filled adjustable shocks
• Machined tapered shock pistons
• EXB Extreme Bash shock stand-offs
• Heavy-duty drivetrain
• All-metal diff outdrives and gearbox internals
• Durable steel driveshafts throughout
• Galvanized turnbuckles

• X-Hard servo saver spring
• Black anodized aluminum easy-access sliding motor mount
• Black aluminum servo mount
• Race Spec high rear wing mount
• Race Spec tunable rear wing
• Factory-finished Race Spec body colors and decals
• dBoots^® Exabyte race compound tires
• Low-drag 1/8 buggy wheels
• Aluminum 17mm wheel hex
• 2-year warranty (see website support for details)

Race-ready with high-end upgrades

Loaded with high-end parts for improved strength, handling, and long-term durability, the 1/8 scale ARRMA^® TLR^® Tuned TYPHON^™ 4WD Race Buggy Roller provides bashers with the perfect platform for entering competitive racing and experimenting with their chassis to achieve the best performance.

The large number of TLR^® Tuned parts and the factory-finished body with bold racing color scheme immediately set this model apart from its ready-to-run TYPHON^™ 6S BLX 4WD Speed Buggy brother. The TLR^® Tuned TYPHON^™ 4WD Race Buggy Roller is the ultimate ARRMA^® 1/8 scale buggy straight out of the box, primed and ready to hit the racetrack — and still tough enough to handle off-road bashing. Just add your choice of 4S or 6S brushless power system and the TLR^® Tuned TYPHON^™ will blast over rough terrain with ease.

The durable TLR^® Tuned aluminum upgrades include the chassis plate, steering rack, adjustable upper and lower suspension hangers, shock bodies, and front and rear shock towers. All are laser-etched with the TLR^® Tuned logo. The chassis also features strong composite side pods and front and rear braces. The oil-filled, adjustable shocks have machined tapered pistons and Extreme Bash (EXB) stand-offs.

The TLR^® Tuned TYPHON^™ 4WD Race Buggy Roller also features a heavy-duty drivetrain that holds up to extreme bashing, with all-metal diff outdrives and gearbox internals plus durable steel driveshafts throughout. Its extra-strong wheel hubs support low-drag wheels on which ARRMA^® engineers have mounted multi-terrain, race compound dBoots^® Exabyte tires for next-level grip. A Race Spec tunable rear wing helps to keep the tires and buggy grounded, contributing to confident control and responsive handling at high speeds.

Maintenance downtime is kept to the minimum with an efficient, driver-friendly design. For example, an aluminum sliding mount gives you fast, hassle-free access to your motor.

The 1/8 scale TLR^® Tuned TYPHON^™ 4WD Race Buggy Roller is the ultimate ARRMA^® buggy. For intermediate-level bashers interested in racing, it offers top-of-the-line durability and tuning capabilities to give you a successful head start.

Video Overview

 

 

TLR^® TUNED PARTS

The TLR^® Tuned TYPHON^™ 4WD Race Buggy Roller has been upgraded with high-end aluminum parts that increase durability and improve handling. For intermediate-level bashers, it's the perfect platform to use for racing and to gain experience with tuning — Designed Fast and Designed Tough!

 

 

OIL-FILLED SHOCKS

The adjustable oil-filled shocks are mounted on TLR^® Tuned 7075-T6 Aluminum Shock Towers and feature TLR^® Tuned Aluminum Shock bodies, machined tapered shock pistons, and EXB Extreme Bash shock stand-offs. They easily soak-up bumps over dirt, asphalt, and grass for super-smooth damping.

 

 

HIGH-TRACTION dBoots^® EXABYTE TIRES

The dBoots^® Exabyte tires are made of high-quality, race compound rubber for long-lasting durability and feature a multi-surface tread pattern for excellent traction in all conditions. They include foam inserts and are pre-glued to low-drag, 1/8 buggy nylon wheels. The 17mm hex fitting provides strength during extreme action and allows easy maintenance.

 

 

RACE SPEC FINISHED BODY

Topping off the TLR^® Tuned TYPHON^™ 4WD Race Buggy Roller is a sleek, factory-finished body featuring exclusive Race Spec colors and decals. A low-drag, tunable rear wing helps keep the buggy grounded, contributing to confident control and responsive handling at thrilling high speeds.

Vendor: Team Associated
Type: 1/10 Stadium Truck
Price: 199.99

The RC10T6.2 has new features such as an integrated fan mount, highly adjustable rear hub assembly, and the speed, durability, and lineage expected of a true champion.

Key Features

• New gull wing front and rear arms and shock towers for improved high traction handling
• B74.1 two-piece rear hubs with aluminum upper caps for fine geometry adjustments
• 1.3mm front anti-roll bar and hardware included for added high-speed stability
• Both Laydown and Layback Stealth(R) transmissions included for tuning weight bias
• Factory Team 13g aluminum ESC tray 

In The Box

• (1) RC10T6.2 Team Kit
• (1) Product Manual 

Needed to Complete

• 1:10 scale 540-size electric motor
• 1:10 scale electronic speed control
• 2- cell LiPo battery pack
• Spray paint for polycarbonate body
• 2-channel radio system and transmitter batteries
• Steering servo
• Pinion gear
• 1:10 scale 12mm hex truck wheels, tires, and inserts
• Glue, shock oil, and tools (see manual for details)
• * This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required

New Features

• New gull wing front and rear arms and shock towers for improved high traction handling
• B74.1 two-piece rear hubs with aluminum upper caps for fine geometry adjustments
• 1.3mm front anti-roll bar and hardware included for added high-speed stability
• Both Laydown and Layback Stealth(R) transmissions included for tuning weight bias
• Factory Team 13g aluminum ESC tray

• Updated side rails for 30mm motor fan mount shared with B6.2 series buggies
• +1 carbon fiber steering block arms
• B74 66mm rear axles and 91mm CVA bones
• 8.5mm aluminum rear clamping hexes with laser etching
• Updated front body mount is more rigid to protect body from cracking
• Standard weight 1.0mm Pro-Line(R) Enforcer body included

Legacy RC10T6.2 Features

• Lightweight, hard-anodized aluminum chassis with centralized mass and three mid-motor positions for improved handling on all track types
• Differential height adjustment with included 0, 1, 2, and 3mm inserts
• Easy access to differential
• Split slipper assembly for better weight balance and shock clearance
• Heavy-duty routed 4.0mm carbon fiber shock towers
V2 12mm Big Bore threaded aluminum shocks with 3mm shafts and X-rings for improved smoothness
• Machined pistons included for better fit and smoother operation

• Reverse bellcrank steering allows more room for mounting electronics
• Bolt-on steering block arms for easy Ackermann adjustments
• Aluminum rear ballstud mount for added strength
• One-piece shock bushings to make assembly easier
• Lightweight aluminum top shaft
• Aluminum C and D arm mounts included for large range of anti-squat and toe adjustments
• Factory Team upgraded ball bearing kit included
• Heavy-duty ball cups and ballstuds allow for maximum suspension travel while reducing bind and friction

Overview

Race-winning heritage. Based on Team Associated's RC10B6.2 platform, the RC10T6.2 Team Kit represents the next step in the evolution for competitive truck racing. The RC10T6.2 Team Kit is the next iteration of the successful truck platform bringing updates to improve adjustability, durability, and most importantly, performance. The engineers behind the doors of Team Associated's Area 51 incorporated the updates racers like you asked for and included more tuning option parts in the box.

Designed to win. The RC10T6.2 shares key components with the RC10B6.2, RC10B6.2D, and RC10B74.1 Team Kits, making it easier than ever to run multiple classes at the same time. Like the RC10B6.2 and RC10B74.1, the RC10T6.2 has new features such as an integrated fan mount, highly adjustable rear hub assembly, and the speed, durability, and lineage expected of a true champion.

The RC10T6.2 has been designed and built to the highest standard to give racers an edge over the competition.

 

Big Bore Shocks

V2 12mm Big Bore threaded aluminum shocks with 3mm shafts and X-rings for improved smoothness

 

 

Stealth Transmissions

•Both Laydown and Layback Stealth(R) transmissions included for tuning weight bias

 

 

Rear Hubs

B74.1 two-piece rear hubs with aluminum upper caps for fine geometry adjustments

 

 

Differential

Easy access to differential with height adjustment with included 0, 1, 2, and 3mm inserts

 

 

ESC Tray

Factory Team 13g aluminum ESC tray

 

 

Side Rails

Updated side rails for 30mm motor fan mount shared with B6.2 series buggies

 

 

Steering Block Arms

+1 carbon fiber steering block arms

 

 

Anti-roll Bar

1.3mm front anti-roll bar and hardware included for added high-speed stability

 

 

Gull Wing

Gull wing front and rear arms and shock towers for improved high traction handling

 

 

Body Included

Standard weight 1.0mm Pro-Line(R) Enforcer body included

 

Vendor: Tekno
Type: 1/8 Truck
Price: 649.99

The Tekno ET48 2.0 1/8 Electric 4WD Off Road Truggy Kit shares many of the parts and design elements first introduced on the EB48 2.0 buggy. A primary goal of this project was to minimise the additional parts needed to help keep drivers on the track or bashing at their favourite spot. You will find that quite a few of the parts you already have will work on the ET48 2.0. Features from the 2.0 buggies have been carried over, such as the industry-first suspension arms with built-in caster. This allows a longer overall arm length, ideal front-end geometry and increased durability. It has rear hubs that provide roll center adjustments by adjusting the axle height, and the active rear toe system has been carried over as well. A substantial amount of time was invested in developing the smoothest suspension package available to make the truck a breeze to drive in the roughest conditions. The quick access differentials with increased volume have also been included to improve consistency and efficiency with minimal maintenance time. 

The ET48 2.0 body has an industry-first exposed front shock tower design as well as a more truck-like appearance. The body is lighter, creates more downforce for increased steering response, flies through the air with greater ease and closer resembles a full size vehicle. Finally, during testing, the body was found to last longer than “standard” truggy bodies.

NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.  

Features:

• 4mm CNC 7075 Aluminum Hard Anodized Lightened Chassis
• Independent Servo/ESC Mount w/ Decoupled Radio Box/Battery Mounts
• CNC 7075 Shock Towers, Pivot Blocks, Motor Mount, and Caster Blocks
• 16mm Bore Fluid Filled Shocks with CNC Delrin Pistons and Guides
• Rear Hub and Arm Insert System w/ Adjustable Roll Center and Toe
• 3 Fluid Filled Easy Access Differentials
• Trendsetting Low Profile Truggy Body Design
• 1-Piece Tall Wing Mount and Ultra-Lightweight Wing
• Proven Tekno RC Durability
• All Metric Hardware 

Needed To Complete:

• 2/3 channel radio/transmitter
• 1/8 Scale ESC and motor
• High torque steering servo (at least 300 oz/in of torque), optional brake servo
• Pinion or Traktion Drive / Elektri-Clutch system
• 4-6S LiPo battery
• 1/8th scale truggy tires, wheels & CA glue
• Paint for body
• Hex tools (1.5, 2.0, 2.5mm), pliers, other tools

Vendor: TLR
Type: 1/10 2wd Buggy
Price: 419.99

Features

• Pro Level Ready
• Carbon Fiber Options Included
• Aluminum Options Included
• New Adjustable Rear Hub and Pivots
• Titanium Turnbuckles Included
• Revamped steering geometry
• Super Heavy Duty Slipper (SHDS)
• Laydown transmission configuration
• Stiffezel suspension components

• Fully Updated Differential
• Built-In Motor Fan Mount
• Lightweight body
• 2.0 Milled aluminum chassis
• Gen3 12mm big-bore shocks
• Front Roll Center Adjustment
• New Front Camber Block and Battery Hold Down
• Ballast tuning options (ballast sold separately)

In The Box

• (1) 22 5.0 DC ELITE Kit
• (1) 22™ 5.0 Cab Forward Body
• (1) Product Manual

Needed to Complete

• (1) Transmitter and Receiver
• (1) Steering Servo
• (1) Steering Servo Mount (TLR331036 Recommended)
• (1) 2S “Shorty” LiPo Battery
• (1) LiPo Battery Charger
• (1) 48 Pitch Pinion Gear
• (1) Motor
• (1) ESC
• (1) Tire Glue
• (4) Wheels
• (4) Tires
• Polycarbonate Paint
• Tools (Please reference the manual for more details)

Overview

The 22 5.0 has proven itself as the next evolution of the 22 2WD buggy platform. Now the 22 5.0 DC ELITE kit gives drivers a professional grade, full team-level kit all in one box! Optimized for dirt and clay tracks, the ELITE kit features fully adjustable rear pivots, adjustable height rear hubs, carbon fiber option parts throughout, and all the aluminum parts have been changed to a sharp black with silver edges to pop against the hard anodized chassis and shock bodies. Building on the improvements to the 22 5.0, the ELITE kit is significantly easier to drive while still giving the car more mid-corning steering with the revised steering geometry, smoother G3 shocks, and the optimized flex of the 2mm chassis plate. Designed to win straight out of the box, the 22 5.0 DC ELITE maximizes performance and is podium ready.

 

Pro Level Ready

Including all of the key option parts that our factory race team uses to win across the world, the 22 5.0 DC ELITE is truly Pro Level Ready from a kit build right out of the box... more so than any 2WD buggy kit ever offered. Parts include Carbon Fiber, Black Anodized Aluminum and Titanium turnbuckles.

 

 

Carbon Fiber Parts Included

The overwhelming popular carbon fiber option and tuning parts for the 22 5.0's have been added into the kit. +2mm front and rear shock towers, electronics mounting plate, and a rear wing washer are now included in the kit!

 

 

Aluminum Option Parts Included

As the team has found many of the optional aluminum parts for the 22 5.0 to improve maintenance or performance, those are now included in the kit as well. Aluminum options included are the bell cranks, drag link, servo mount, outer front bearing inserts, rear camber block, C and D pivots, and aluminum nuts throughout.

 

 

All New Rear Hubs and Inner Rear Pivots

The 22 5.0 DC ELITE includes Inner Rear Pivots with roll center, track width, anti-squat and toe adjustment paired with the Variable Height Axle (VHA) rear hubs which also give more roll center and axle height adjustment. This is the most adjustable rear suspension TLR has ever produced.

 

 

Titanium Turnbuckles Included

Titanium turnbuckles have always been a premium upgrade for race vehicles, and there could not be a proper 22 5.0 DC ELITE kit without them. Included are titanium turnbuckles throughout the buggy to save weight and increase performance.

 

 

Revamped Steering Geometry

The 22 5.0 is the best driving 2wd Team Losi Racing has ever created, and the biggest improvement comes from the steering geometry. Increasing the length of the steering bell cranks and spindle arms, along with changes to the Ackermann angle give the 22 5.0 a significantly smoother steering feel, especially off-center and high speed, while increasing low-speed steering for tighter tracks and 180's.

 

 

Super Heavy Duty Slipper (SHDS)

The slipper is optimized with all new slipper plates, slipper pads, spring, spur gears, and an all new top shaft. The new top shaft uses a sturdy M4 lock nut, the new slipper pads allow for spur gears sized 69T to 81T, reduced slipper pad area provides a more linear slip through the throttle application, and thicker slipper plate keep consistent pressure across the surface of the slipper pads.

 

 

G3 12mm Big Bore Shocks

The G3 shocks give the 22 5.0 the plush handling and consistent, leak-free bleed as the Gen II shocks, but with some long-anticipated ease of use improvements. No more e-clips as the pistons are now secured by screws, new shock caps and shock bodies increase the spring collar height by 3mm to accommodate lower ride heights, new eyelets and spring cups provide -3mm, 0mm and +4mm spring cup off-sets and paired with all new eyelets will never pop off with the screw in feature. The new eyelets are also made in two lengths that allow racers to switch between different heights, and work with revised shock balls that finally slide into the front arms smoothly and easily.

 

 

2.0 Milled Aluminum Chassis

Maximizing the flex characteristics for all surfaces, the 2.0mm thick chassis give the right about of flex and rigidity for smooth corning, optimized balance, and bounce-free landings.

 

 

Fully Updated Differential

Using all of the revised components from the 22 2.0 ball differential, the 22 5.0 diff will deliver super-smooth, long-lasting performance. Features include revised thrust washers, tungsten carbide diff and thrust balls, a one piece nut, and a self-centering diff gear.

 

 

22 5.0 Body

Maintaining the excellent balance, grip, and stability of the 22 4.0 body, with a similar styling, the 22 5.0 body is pulled from 0.8mm PC plate for a lightweight body that still has fantastic durability. As with all TLR bodies, the 5.0 body will be precut in the kit.

 

 

TLR Low Front Wing Included

With the higher speed, higher grip tracks of today, a front wing will increase steering in high speed turns and on power, while making the steering on entry smoother - the best of all worlds.

 

 

All Metric Hardware

Using all metric hardware make it easy to find replacement screws, nuts and washers, and helps to limit the number to tools required in the toolbox.

 

 

Diff Height Adjustment

The 22 4.0 included diff height adjustments including 0 and +3.5mm settings. The 22 5.0 DC includes 0mm, +1mm, +1.75mm, +2.5mm, and +3.5mm diff heights to optimize bone plunge for different axle heights, ride heights, and grip levels.

 

 

Front Roll Center Adjustment

The 22 5.0 includes the standard Low Roll Center (LRC) front pivot with kick shim in the kit and offers the optional High Roll Center (HRC) front pivot separately. A new 1mm thick kick shim is also included. Now, racers can run the Super Low Roll, Low Roll, Medium Roll, or High Roll Centers, or High Roll Center, with a 3mm adjustment window.

 

 

New Front Camber Block

The new front camber block adds a third camberlink option between the tradition inside and outside holes. The new position provides the best balance of steering and stability in many conditions, and allows the 22 5.0 to be more dialed-in on more different grip levels.

 

 

New Battery Hold Down

The 22 5.0 boasts the most versatile and easiest to use battery hold down system. The battery cradles key into the mud guards for five fixed, and easy to duplicate, battery positions. The battery is then held down with elastomer straps on each end that can stretch to fit any height shorty battery and any weight plates under it. Best of all, the battery is out in no time flat and back in just as easily.

 

 

Optimized Composites

The balance and consistency of the 22 5.0 can be tuned using different composite materials in key parts throughout the vehicle. The kit included the parts the race team prefers: Stiffezel front suspension arms, mud guards, and waterfall and soft rear suspension arms.

 

 

Ballast Tuning Options

Optional brass ballast weighs can be mounted under the servo, under the battery, and under the laydown transmission idler. This makes it easy to tune the static weight and weight bias for changing track conditions. When running a higher static weight, the chassis will become more neutral and easier to drive on ultra-high-grip surfaces.

 

 

TLR 6.5" Rear Wing

Pulled from ultra-durable 1.2mm polycarbonate, the TLR 6.5" rear wing isn't new for the 5.0. Instead, this wing has proven itself as the longest lasting and most stable rear wing available for 1/10 2wd buggies over the past few years - and it comes in your kit.

 

 

Built-In Motor Fan Mount

The prevalence of spec racing has led to the need for many racers to run motor fans to keep temperatures lower. Rather than an aluminum mount, or double-sided tape, the 22 5.0 includes a molded fan mount secured to the mud guard for easy and dependable fan mounting.

 

 

Laydown Configuration

The laydown 3-gear transmission moves the motor forward by 20mm+ to a more centralized location. The benefit is a chassis that drives much flatter and carries more corner speed.

 

 

Product Specifications

Ball Bearings	Full set, rubber sealed
Chassis	7075-T6 Aluminum Milled Plate 0.08" (2mm) thick
Completion Level	Kit
Drivetrain	2WD
Product Height	5.8" (148mm)
Rear Track	9.8 in (249mm)
Speed Control	Sold Separately
Wheelbase	11" (280mm)
Approximate Assembly Time	3-5 Hours
Body	Cab forward, 0.03" (0.7mm) thick
Scale	1/10
Bushing Material	Metal
Charger	Sold Separately
Differential	Ball type
Max Battery Dimensions	5.5 x 1.8 x 0.96" (139.7 x 46 x 24.5mm)
Receiver	Sold Separately
Shock Type	Oil filled 12mm Big Bore
Power Type	Electric
Gear Pitch	48-Pitch
Vehicle Type	Buggy
Water-Resistant	Yes
Front Track	9.8 in (249mm)
Product Width	9.8" (250mm)
Battery	Sold Separately
Internal Gear Ratio	2.43:1
Product Length	15" (382mm)
Suspension	Stiffezel Front Suspension Arms, Soft Rear Suspension Arms

Vendor: Losi
Type: 1/16 Scale
Price: 159.99

The legendary Losi® Mini's are back! Featuring TLR® 2wd buggy engineering and performance in a 1/16th package, the Losi Mini-B Buggy is terrain-tearing and track-ready.

Needed to Complete

• Nothing! Everything is included in the box!

Features

• Scaled down version of the 1/10 22
• Mid Motor Configuration
• Elastomer Battery Strap System
• Aluminum Chassis
• Threaded Oil Filled Shocks
• Fully assembled and ready-to-run
• HRZ 2-in-1 ESC/RX
• Dynamite^® Brushed 280-sized 47T motor
• Spektrum^™ SX107 metal gear servo

• Taper Pin Front and BK Bar Rear Tires with Dish Wheels
• Full Ball Bearings (less steering)
• Servo Saver
• Waterproof electronics
• 22 Suspension Geometry
• 650mAh 2S Lipo Battery with EC2 Connector and USB 0.5A Charger
• Option Parts Availability
• Three Color Options

Overview

The legendary Losi^® Mini's are back! Featuring TLR^® 2wd buggy engineering and performance in a 1/16th package, the Losi Mini-B Buggy is terrain-tearing and track-ready. The larger 1/16th scale is stable on the track generating quicker speeds and improved handling. With suspension geometry updated and taken from the TLR^® 22 platform and the inclusion of waterproof electronics with a 2.4Ghz radio system, you get more from a Mini than ever before. It features a mid-motor configuration for better balance, oil filled shocks, and a full range of option parts all in a total ready-to-run package. Everything about this buggy is designed to deliver a jaw-dropping experience.

Video Overview

 

 

Scaled-Down Version

Featuring TLR 2WD buggy engineering and performance in a 1/16th package, the Losi Mini-B Buggy is terrain-tearing and track-ready. The larger 1/16th scale is stable on the track generating quicker speeds and improved handling.

 

 

Mid Motor Configuration

The Mini-B comes standard with a mid-motor configuration. This not only replicates the 1/10th version but also provides a better balanced chassis allowing for better performance on multiple surfaces and also balances out steering and traction.

 

 

Aluminum Chassis

The Mini-B has been designed with a 1.5mm thick 6061-T6 Aluminum chassis plate. The aluminum chassis provides more strength and durability while vastly improving performance.

 

 

Threaded Oil Filled Shocks

The injection-molded shocks feature threaded shock collars allowing for easy preload/ride height adjustments. Additionally, the shock bodies feature a bottom loading, re-buildable shock cartridge with dual o-rings to help keep the oil in the shocks.

 

 

Ready To Run

The Mini-B comes fully assembled and ready to rock. Just install the included AAA batteries in the transmitter, charge the included LiPo battery with the included charger.

 

 

Dynamite Reaction 2.0 LiPo Battery

The Mini-B comes equipped with a Dynamite Reaction 2.0 7.4V 650mAh 2S 20C LiPo Battery for excellent performance and run time.

 

 

USB Charger

When we say entirely ready to run, we mean it. The Mini-B comes with a USB charger making charging your battery easy and convenient.

 

 

2.4Ghz Transmitter and Receiver

With features like throttle/steering reversing, throttle/steering travel adjust, the included 2.4Ghz transmitter packs a lot of features in a small package with the interference-free connection.

 

 

Taper Pin Front Tires

Mounted on dish wheels, the Taper Pin front tires replicate one of the most popular tires from Losi.

 

 

BK Bar Rear Tires

Mounted on dish wheels, the BK Bar rear tires replicate one of the most popular tires from Losi.

 

 

Full Ball Bearings*

The Mini-B comes equipped with ball bearings that enhance vehicle performance by reducing drivetrain friction and increased smoother, longer running.

*Less steering bell crank

 

 

Servo Saver

The Mini-B comes with an oversized three-wire Spektrum metal gear servo equipped with a servo saver that provides extra protection.

 

 

Waterproof Electronics*

All the Mini-B components are waterproof, so you can drive in any conditions with no problems.

*For details on waterproof standards, please refer to the product instruction manual

 

 

TLR 22 Buggy Suspension Geometry

The Mini-B suspension geometry has been derived from the TLR 22 Buggy platform providing balanced steering and traction from the optimized race design.

 

 

 

Option Parts

The Mini-B has a full line of option parts available from aluminum upgrades, brushless motor, and much more.

Specs

Approximate Assembly Time	Less than One Hour
Ball Bearings	Complete, Less Steering
Battery	Included
Battery Input Lead	EC2
Body	Mini-T 2.0, Polycarbonate, Screened
Brakes	Integral with ESC
Bushing Material	Plastic
Charger	Included
Chassis	1.5mm Plate, 6061-T6 Aluminum
Completion Level	Ready-To-Run
Differential	Bevel Gear
Drivetrain	2WD
Drive Type	Forward/Brake/Reverse
Power Type	Electric
Gear Pitch	0.5MOD
Motor Size	280
Motor Type	Brushed
Pinion	18T
Product Height	4" (102 mm)
Product Length	10.7" (272 mm)
Product Width	7" (178 mm)
Radio	Included
Receiver	Included
Scale	1/16
Servos	Included
Shock Type	7mm bore, oil filled
Speed Control	Included
Spur Gear	60T
Suspension	Independent
Tire Tread	Tapered Pin Front, BK Bar Rear
Vehicle Type	Buggy
Water-Resistant	Yes
Wheelbase	7.5 in (190.5mm)
Wheel Type	Dish